In just 6 weeks, Jrain’s excellent production team finished two sets of DN36m launder systems, including launders, effluents, weirs, baffles, baffle supports and supporting accessories. This project proved our capability one more time.
Rubber gaskets, commonly used in various industrial applications, serve the purpose of preventing oil leakage and maintaining the integrity of machinery by creating a barrier between two or more components.
ERIKS type M (type B according to the DIN standard) has a single metal casing and rubber sealing lip. Since the casing is made of metal, it must be fitted in a well-finished, undamaged groove. Large volumes of oil seals with metal casings are often cheaper, which is why they are often used as original equipment in machines. However, if an oil seal has to be replaced, types with a rubber exterior (type R or RST) are easier to fit. Type MST is similar to M and commonly used. The difference is the dust lip in the MST oil seal that prevents dust and dirt reaching the sealing lip, and extends its service life in dusty environments.
Failure to install oil seals correctly can lead to failure. Factors such as knocking the seal into place may cause its spring to tilt in the bore or be out of alignment. Consider switching to a solid adhesive and applying it around the surface of the spring to prevent it from loosening.
One way to identify a seal that has not been fitted correctly is to check the rough shear of the rubber. To resolve this issue, align the mounting tool before positioning the seal in place.
This is a specific type of synthetic rubber that’s commonly used in o-rings, gaskets, oil seals, sterile & chemical resistant gloves, and other molded items. Viton has a high density and it possesses the widest temperature range of -40 degrees Fahrenheit to more than 400 degrees Fahrenheit. This is why it’s highly preferred as the best material for higher temperature applications.
These oil seals are the best for applications involving high temperatures. It’s suitable for temperatures between -4 degrees Fahrenheit and 392 degrees Fahrenheit. Also, it’s highly resistant to acids, dissolvent materials, and other chemicals. Viton (FKM/FPM) oil seals can run at a maximum speed of 38 m/s.
Regular maintenance and inspection of the oil seal are essential to ensure its continued effectiveness. Any signs of wear or damage should be addressed promptly to prevent oil leaks and potential damage to the machinery or equipment.
The major cause of extrusion and nibbling is stress caused by high pressure. This is commonly noticed when the oil seal has a chipped or nibbled look. In fact, in some cases, the surface of the seal tends to peel on its own, which makes it have a shaved look. What the stress does is that it increases the clearance gap between the mating edges, which causes the seal to get entrapped, and then leads to severe physical damage.
