Although food-grade titanium dioxide must be 99 percent pure, there’s still a risk of it containing potential contaminants, such as mercury, lead and arsenic. Additionally, inhaling the mineral over time can possibly cause it to build up in your body, leading to adverse effects.

The skin of an adult person is, in most places, covered with a relatively thick (∼10 μm) barrier of keratinised dead cells. One of the main questions is still whether TiO₂ NPs are able to penetrate into the deeper layers of the skin. The majority of studies suggest that TiO₂ NPs, neither uncoated nor coated (SiO₂, Al₂O₃ and SiO₂/Al₂O₃) of different crystalline structures, penetrate normal animal or human skin. However, in most of these studies the exposures were short term (up to 48 h); only few long-term or repeated exposure studies have been published. Wu et al.83 have shown that dermal application of nano-TiO₂ of different crystal structures and sizes (4–90 nm) to pig ears for 30 days did not result in penetration of NPs beyond deep epidermis. On the other hand, in the same study the authors reported dermal penetration of TiO₂ NPs with subsequent appearance of lesions in multiple organs in hairless mice, that were dermal exposed to nano-TiO₂ for 60 days. However, the relevance of this study for human exposure is not conclusive because hairless mice skin has abnormal hair follicles, and mice stratum corneum has higher lipid content than human stratum corneum, which may contribute to different penetration. Recently Sadrieh et al. performed a 4 week dermal exposure to three different TiO₂ particles (uncoated submicron-sized, uncoated nano-sized and coated nano-sized) in 5 % sunscreen formulation with minipigs. They found elevated titanium levels in epidermis, dermis and in inguinal lymph nodes, but not in precapsular and submandibular lymph nodes and in liver. With the energy dispersive X-ray spectrometry and transmission electron microscopy (TEM) analysis the authors confirmed presence of few TiO₂ particles in dermis and calculated that uncoated nano-sized TiO₂ particles observed in dermis represented only 0.00008 % of the total applied amount of TiO₂ particles. Based on the same assumptions used by the authors in their calculations it can be calculated that the total number of particles applied was 1.8 × 10¹³ /cm² and of these 1.4 x10⁷/cm² penetrated. The surface area of skin in humans is around 1.8 m²  and for sun protection the cream is applied over whole body, which would mean that 4 week usage of such cream with 5 % TiO₂ would result in penetration of totally 2.6 × 10¹⁰ particles. Although Sadrieh et al.concluded that there was no significant penetration of TiO₂ NPs through intact normal epidermis, the results are not completely confirmative.

Lithopone

Above 10%, 1 kg of TiO2 should be replaced by 1.3 kg of lithopone supplier 30%, reducing the amount of polymer accordingly. 

What's the deal with titanium dioxide?

Abstract

Overwhelmingly, research that’s relevant to human eating patterns shows us that E171 is safe when ingested normally through foods and drugs (1,2).

In the paper industry, TiO2 is used to create high-quality, bright white paper products. By adding TiO2 to pulp, paper manufacturers can improve the opacity, brightness, and printability of their products. TiO2 also enhances the lightfastness and aging resistance of paper, ensuring that it maintains its appearance and quality over time. With TiO2, paper products can achieve a superior level of whiteness and visual appeal.

0.5% Max

Jinan Yuxing Rutile Titanium Dioxide R-818 is a rutile titanium dioxide pigment coated with inorganic silicon aluminum and organic surface treatment. It has good gloss and hiding power, high weather resistance and good dispersibility.
Scope of application: plastic steel profiles, coil paint, powder coatings, rubber, masterbatch, etc.

Lithopone was discovered in the 1870s by DuPont. It was manufactured by Krebs Pigments and Chemical Company and other companies.^[2] The material came in different seals, which varied in the content of zinc sulfide. Gold seal and Bronze seals contain 40-50% zinc sulfide, offering more hiding power and strength.^[3] Although its popularity peaked around 1920, approximately 223,352 tons were produced in 1990. It is mainly used in paints, putty, and in plastics.^[1]

What titanium dioxide is really emblematic of ... is the failure of FDA to look back at these old decisions and ask whether its decisions that were made in this case ... 56 years ago (in the 1966 approval) still hold up, he said.

Titanium dioxide (TiO2) is a versatile compound widely utilized in various industries, particularly in the production of paints, coatings, plastics, and paper. The accurate determination of titanium dioxide content is essential for quality control purposes in these manufacturing processes. Among the various methods available for quantifying TiO2, gravimetric analysis stands out due to its reliability and accuracy. This article explores the gravimetric determination of titanium dioxide, its significance in factory settings, and the technical processes involved.

Lithopone market, by region