The perfect solution to this is to always use an oil seal that fits properly; the right size of the seal should be used. And in other cases, backup devices should be used to avoid the buildup of clearance gaps within the mating edges.

All are fitted with a spring to preload the sealing lip. All these types are for non-pressurised or low-pressure applications up to 0.5 bar for diameters of a limited size. For diameter of 500 mm or more, the maximum pressure is 0.1 bar. For higher pressures, special types or PTFE lip seals can be used.

As type A with dust lip

There are a wide range of oil seals to select from for any number of uses, so this guide will break down the most common seals to help you choose the right one for whatever piece of machinery you are working on.

Now, slid the o-ring to fit into the shaft.

Despite being incredibly flexible, silicone has some significant drawbacks. The toughness, resistance to wear, and abrasion of many silicone compounds are poor. If you seriously need an oil seal material with better strength and resistance to high temperature, the perfect option is Viton.