The properties of lithopone are very suitable for use in the production of coatings. Because the ingredients of lithopone are zinc sulfide and barium sulfate, and the more zinc sulfide content, the stronger its covering power. This indicates a paint product with strong white covering power. It is different from water in that it reacts with acid but does not react with alkali. It has a wide range of uses. Because its structural properties are similar to titanium dioxide and its price is relatively cheap, it can also be used as a substitute for some titanium dioxide. Lithopone can be used for coloring paints, inks, pigments, rubber, paper, leather, enamel, etc.

To overcome this challenge, manufacturers use advanced technology and processes to monitor and control the buff percentage of their products. This may involve the use of sophisticated equipment to measure the coating thickness of titanium dioxide particles, as well as automated systems to adjust the level of coating as needed. By carefully controlling the buff percentage, manufacturers can ensure that their products meet the specifications of their customers and maintain a high level of quality and performance.

The global Lithopone market report provides in-depth competitive analysis as well as profiles of these major players.

Conclusion:

White crystalline powder. It is a mixture of zinc sulfide and barium sulfate. The more zinc sulfide it contains, the stronger the hiding power and the higher the quality. Density 4.136～4.34 g/cm3, insoluble in water. It easily decomposes when exposed to acid to produce hydrogen sulfide gas, but does not work when exposed to hydrogen sulfide and alkaline solutions. It turns into light gray after being exposed to ultraviolet rays in the sun for 6 to 7 hours, but it still returns to its original color when placed in a dark place. It is easy to oxidize in the air and will agglomerate and deteriorate when exposed to moisture.

R-996:

Example of partial substitution of titanium dioxide with lithopone supplier 30% in a liquid paint. 

Titanium dioxide can form several different shapes, which have different properties. Some shapes can be converted to nanomaterials. Micronized TiO2 (also called “nano” or “nanoparticles”) was introduced in the early 1990s.Nanotechnology and micronization both refer to the practice of creating very small particles sizes of a given material. “Nanoparticles” usually refers to particles smaller than 100 nanometers; a nanometer is 1/1 billionth of a meter. At these small sizes, and at low concentrations, titanium dioxide appears transparent, allowing for effective sunscreens that do not appear white.

Lithopone 30% is a perfect alternative to titanium dioxide in all natural and synthetic pigmented elastomers, as it is non-abrasive and extremely acid resistant. 

A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.

lithopone supplier 30% complies with both the REACH and Indirect Food Regulations, as well as with many European regulations regarding Toys, Packaging, Resins, etc… 

Lithopone, C.I. Pigment White 5, is a mixture of inorganic compounds, widely used as a white pigment powder. It is composed of a mixture of barium sulfate and zinc sulfide. These insoluble compounds blend well with organic compounds and confer opacity. It was made popular by the cheap production costs, greater coverage. Related white pigments include titanium dioxide, zinc oxide (zinc white), zinc sulfide, and white lead.

Toxic effects of TiO₂ NPs on soil organisms

However, some experts and food regulators in other countries disagree – pointing to potential, serious health consequences and rising concerns about the additive. Starting August 7, for example, the use of titanium dioxide in food will be banned in the European Union.