Remove most of the fixings, then support the sump with one hand while you take out the last few.

If the seal is being fitted to original equipment you may have some influence over the shaft and housing bore finish, but if you are replacing a worn seal you still need to take into account the condition of these 2 essential parts. Check for sharp edges and burrs – particularly on the shaft and housing chamfers or you could ruin the seal before you start up. If the shaft is too worn consider using an M Barnwell Services Shaft Repair Kit.

A patent for an oil seal was filed by Nelson Thomas Edward on August 12, 1937, and published a year later. There were two purposes described. The device was to provide an oil seal between a fixed housing and a rotating part. The seal is described as

• Super helix seal (seal with one-way two-step screw)

The sealing element makes up the interior of the oil seal, and the materials commonly used are:

Also, Viton has the widest range of resistance to chemicals. It’s resistant to several chemicals like silicone oil & grease, mineral & vegetable oil, aliphatic, chlorinated hydrocarbons, methanol fuels, and so many more.

What are Oil Seals?