
1. Prepare the surface Before applying the tape, make sure the surface is clean and dry. Remove any dirt, grease, or debris from the surface to ensure a proper seal.

Download our Grating Selection Chart to help you find the right type of grating. To help you with load calculations, we have a handy molded grating load table PDF with information on the load capacities of different grating sizes.
Polyethylene, polyester, and polyimide are three different types of carrier materials used in adhesive tapes, each with its own advantages and characteristics.
Size: 3m x 25mm (0.5mm thick)
Total thickness: 0.50mm (±0.01)
The interface is the display component that gives you access to your control box. It allows you to set your control box or even perform diagnostics. Typical control box interfaces come in the form of switches and boxes. However, there are advanced interfaces that include touchscreens.
As described in the article “How Polyimide Tapes are Made“, tapes are composed of two distinct layers, each of which is critical to the properties of the final product. The first layer is the backing material, and whether this is polyimide film (the generic verison of DuPont’s Kapton), polyvinyl chloride (PVC), Polyethylene terephthalate (PET), or some other plastic, cloth or paper material, this layer is selected to provide half of the tape’s final properties. The other half is determined by the adhesive layer applied to this backing layer.
These specialized control boxes are primarily deployed in business buildings and their primary role is to manage air conditioning systems and lighting. They are relatively more complex than residential control boxes but their strength cannot be equated to that of industrial boxes.
1. Prepare the surface Before applying the tape, make sure the surface is clean and dry. Remove any dirt, grease, or debris from the surface to ensure a proper seal.