FRP Grating is manufactured using an Isophthalic Polyester which has very good chemical resistance, good flame resistance and is the best general-purpose resin available. (Other resins available are Vinyl Ester and Phenolic, available for custom orders)
frp spraying pipe. They can be custom-made to fit specific dimensions and configurations, accommodating complex installations or tight spaces. Their smooth inner surface reduces fluid friction, enhancing flow efficiency and minimizing pressure loss, a crucial factor in many industrial processes.
The FDA first approved the use of titanium dioxide in food in 1966, following its 1960 removal (along with the removal of other color additives) from the agency's original Generally Recognized as Safe list. In 1977, titanium dioxide joined the list of color additives that are exempt from certification, which means titanium dioxide doesn't have to be listed on the packaging of every product it's used in, Faber noted.
Lithopone is rather nontoxic, due to the insolubility of its components. It has been used in medicine as a radiocontrast agent. Lithopone is allowed to be in contact with foodstuffs in the US and Europe.[1]
In addition to UV resistance, anatase titanium dioxide is also known for its chemical stability. This means that coatings made with this ingredient are less likely to break down or react with other substances, leading to a longer-lasting finish. This is especially important in industries where coatings are subjected to harsh conditions or frequent exposure to chemicals.
Earlier this year, a bill was introduced in the California legislature to ban the manufacture, sale and distribution of foods in the state containing titanium dioxide, along with four other harmful food chemicals.
Made Safe only allows titanium dioxide as part of sunscreen solutions and diaper creams; all titanium dioxide must be non-nanoparticle. Made Safe does not allow titanium dioxide in any other personal care or household products.
Pure PVB is non-toxic and harmless to human body. In addition, ethyl acetate or alcohol can be used as solvent, so PVB is widely used in printing ink of food containers and plastic packaging in European and American countries.
Storage safety properties
PVB can be stored for two years without affecting its quality as long as it is not in direct contact with water; PVB shall be stored in a dry and cool place and avoid direct sunlight. Heavy pressure shall be avoided during PVB storage.
Solubility
PVB is soluble in alcohol, ketone, ester and other solvents. The solubility of various solvents changes according to the functional group composition of PVB itself. Generally speaking, alcohol solvents are soluble, but methanol is more insoluble for those with high acetal groups; The higher the acetal group, the easier it is to dissolve in ketone solvents and ester solvents;
PVB is easily soluble in cellosolve solvents; PVB is only partially dissolved in aromatic solvents such as xylene and toluene; PVB is insoluble in hydrocarbon solvents.
Viscosity characteristics of PVB solution
The viscosity of PVB solution is greatly affected by the formula of solvent and the type of solvent; Generally speaking, if alcohol is used as solvent, the higher the molecular weight of alcohol, the higher the viscosity of PVB solution;
Aromatic solvents such as xylene and toluene and hydrocarbon solvents can be used as diluents to reduce the viscosity of PVB solution; The effect of PVB chemical composition on viscosity is summarized as follows: under the same solvent and the same content of each base, the higher the degree of polymerization, the higher the solution viscosity; Under the same solvent and the same degree of polymerization, the higher the acetal group or acetate group, the lower the solution viscosity.
Dissolution method of PVB
Where mixed solvents are used, the dissolution step is to first put aromatic solvents (such as xylene, toluene, etc.) or ester solvents (such as n-butyl acetate, ethyl acetate, etc.) into the mixing, slowly put PVB into the mixing, and then add alcohol solvents (such as n-butanol, ethanol, etc.) after PVB is dispersed and expanded,
At this time, the dissolution time can be shortened by heating; Using this dissolution method, the formation of lumpy PVB can be avoided (because the dissolution time will be several times after the formation of lumpy PVB), so the dissolution speed can be accelerated. Generally, the ratio of aromatic and alcohol solvents is 60 / 40 ~ 40 / 60 (weight ratio), and PVB solution with low viscosity can be prepared.
The solvent composition contains 2 ~ 3wt% water, which can improve the hydrogen bonding strength of alcohol solvents and help the solubility of PVB.
Processing properties
Although PVB resin is a thermoplastic, it has little processability before plasticizer is added. Once plasticizer is added, its processability is very easy.
The purpose of general coatings and adhesives is to change the resin characteristics by adding plasticizers to meet the application requirements, such as film softness, reducing the TG point of the resin, reducing the heat sealing temperature, maintaining low-temperature softness, etc.
Compatibility
PVB can be compatible with a variety of resins, such as phenolic resin, epoxy resin, alkyd resin and MELAMINE resin.
B-08sy, b-06sy and b-05sy with high acetal degree can be mixed with nitrocellulose in any proportion. PVB and alkyd resin are partially compatible. General PVB is compatible with low molecular weight epoxy resin, while high molecular weight epoxy resin needs PVB with high acetal degree to be compatible with each other.
Market Dynamics
What Is Titanium Dioxide?
Titanium dioxide, also called titania, is an odorless white powder and naturally occurring mineral that is widely used as a pigment for its brightness and whitening effects on a variety of materials, such as paint, plastic, paper, cosmetics, sunscreens, toothpastes and foods.
It’s produced through the sulfate or chloride process, which both involve treating titanium ore with sulfuric or hydrochloric acid to produce titanium sulfate or titanium chloride. These materials are then further processed to remove impurities and produce titanium dioxide in its final form.
Food-grade titanium dioxide differs from what’s added to plastics and paints to enhance whiteness. However, there have been concerns about the environmental impact of titanium dioxide production and the potential health risks from exposure to its particles.
Although food-grade titanium dioxide must be 99 percent pure, there’s still a risk of it containing potential contaminants, such as mercury, lead and arsenic. Additionally, inhaling the mineral over time can possibly cause it to build up in your body, leading to adverse effects.
Uses
Barium sulfide is produced by carbothermic reduction of barium sulfate. Zinc sulfate is obtained from a variety of zinc products, often waste, by treatment with sulfuric acid.
Analyst Insight
R-818: