The polymerization of resin monomers was initiated in the presence of nanofibers as structural templates to prepare a hydrogel with nanofibrous networks, followed by the drying and pyrolysis to get hard carbon aerogel. During polymerization, the monomers deposit on templates and weld the fiber-fiber joints, leaving a random network structure with massive robust joints. Moreover, physical properties (such as diameters of nanofiber, densities of aerogels, and mechanical properties) can be controlled by simply tuning templates and the amount of raw materials.
In a study published in the journal Environmental Toxicology and Pharmacology in 2020, researchers examined the effects of food additives titanium dioxide and silica on the intestinal tract by grouping and feeding mice three different food-grade particles — micro-TiO2, nano-TiO2, and nano-SiO2. With all three groups, researchers observed changes in the gut microbiota, particularly mucus-associated bacteria. Furthermore, all three groups experienced inflammatory damage to the intestine, but the nano-TiO2 displayed the most pronounced changes. The researchers wrote: “Our results suggest that the toxic effects on the intestine were due to reduced intestinal mucus barrier function and an increase in metabolite lipopolysaccharides which activated the expression of inflammatory factors downstream. In mice exposed to nano-TiO2, the intestinal PKC/TLR4/NF-κB signaling pathway was activated. These findings will raise awareness of toxicities associated with the use of food-grade TiO2 and SiO2.”
Fig. 6. AOPP measured on samples of MSSA with: A) 0.2 mg/mL P25TiO2NPs; B) 0.02 mg/mL P25TiO2NPs; C) 0.2 mg/mL VitaminB2@P25TiO2NPs; D) 0.02 mg/mL VitaminB2@P25TiO2NPs after 3 h of irradiation (red) and 6 h (blue). SD <1 (error bars too small to be seen) and p < 0.05 between C-D and A-B.
Résumé–Cet article traite de la découverte de lithopone phosphorescent sur des dessins à l'aquarelle, datés entre 1890 et 1905, de l'artiste Américain John La Farge et de l'histoire du lithopone dans l'industrie des pigments à la fin du 19e et au début du 20e siècle. Malgré de nombreuses qualités souhaitables pour une utilisation en tant que blanc dans les aquarelles et les peintures à l'huile, le développement du lithopone comme pigment pour artistes a été compliqué de par sa tendance à noircir lorsqu'il est exposé au soleil. Sa disponibilité et son usage par les artistes demeurent incertains parce que les catalogues des marchands de couleurs n'étaient généralement pas explicites à indiquer si les pigments blancs contenaient du lithopone. De plus, lors d'un examen visuel, le lithopone peut être confondu avec le blanc de plomb et sa phosphorescence de courte durée peut facilement être ignorée par l'observateur non averti. À ce jour, le lithopone phosphorescent a seulement été documenté sur une autre œuvre: une aquarelle de Van Gogh. En plus de l'histoire de la fabrication du lithopone, cet article décrit le mécanisme de sa phosphorescence et son identification à l'aide de la spectroscopie Raman et de la spectrofluorimétrie.
Tinting(contrast to the sample)
The company has a wide variety of products, mainly including rutile titanium dioxide R818, R838, R868, R878, covering profiles, also have anatase TiO2 A1. Soft plastics and masterbatches, flat coatings, high-gloss coatings, water-based coatings, oil-based coatings, rubber, powder coatings, papermaking and other special fields, its products have been known in the market for their excellent whiteness and brightness, good hiding power and tinting power, stable application performance, and stable product quality and supply capacity.
With its storied history and distinct properties, lithopone remains a subject of historical significance and contemporary relevance. While its applications and popularity have evolved, its role in the annals of pigment history is indisputable.
In a study published in the journal Food and Chemical Toxicology in 2016, researchers investigated whether titanium dioxide exposure led to an increase in colorectal tumor creation in mice by using a colitis associated cancer model. By measuring tumor progression markers, the researchers found that mice given titanium dioxide experienced enhanced tumor formation in the distal colon. There was also a decrease of cells that act as a protective barrier in the colon. The researchers wrote: “These results suggest that E171 could worsen pre-existent intestinal diseases.”
Furthermore, this packaging has been shown to have both antibacterial and photocatalytic activity, the latter of which reduces ultraviolet (UV) exposure (5Trusted Source, 6).
Apart from the cosmetics industry, the coatings and plastics industry is also expected to contribute significantly to the growth of titanium dioxide in 2023. Coatings made from titanium dioxide offer excellent hiding power, durability and weather resistance, making them ideal for outdoor applications. Demand for high-quality coatings is expected to surge as the construction and automotive industries expand. Titanium dioxide is at the forefront of providing aesthetic and protective coatings, making it an indispensable ingredient in the industry.
A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.
On the other hand, Westerhoff said, there are hundreds of studies showing no adverse effects from the substance.
According to Procurement Resource, the second half of the year would be passive for the price trendss of Titanium Dioxide. The major entities weighing on the prices are expected to be over-supply and matured inventories, sluggish demand from the downstream paints and varnishes, and enfeebled costs of upstream processes.
The realization of neuromorphic resistive memory in TiO2 thin films (Strukov et al., 2008) marked an important milestone in the search for bio-inspired technologies (Chua and Kang, 1976). Many research proposals urged a focus on memristivity as the common feature of two electrical models: (i) electromigration of point defects in titanium oxide systems (Baiatu et al., 1990; Jameson et al., 2007) and (ii) voltage-gated ionic channels in the membranes of biological neurons (Hodgkin and Huxley, 1952). In this regard, memristors functionally mimic the synaptic plasticity of biological neurons, and thus can be implemented in artificial and hybrid neural networks. This includes a new paradigm of future computing systems (Zidan, 2018) and biocompatible electronics such as biointerfaces and biohybrid systems (Chiolerio et al., 2017).
JECFA also evaluated estimates of dietary exposure to titanium dioxide, estimating the maximum 95th percentile of exposure to be 10 mg/kg BW per day. Overall, considering the low oral absorption of titanium dioxide as a food additive, the committee reaffirmed the ADI “not specified” that was established at the 13th meeting.
According to the EFSA's Expert Panel on Food Additives and Flavorings 2021 opinion regarding titanium dioxide, it could not rule out a concern for genotoxicity from ingestion of the material based on a perceived gap in data on this risk, which serves as the basis for current ban, said a March report on the decision.
As a food additive, titanium dioxide and its nanoparticles in particular have been associated with DNA damage and cell mutations, which in turn, have potential to cause cancer. When used as a food coloring, it is known as E171.
The disadvantage of Titanium Dioxide is that it's not cosmetically elegant, meaning it's a white, unspreadable mess. Sunscreens containing Titanium Dioxide are often hard to spread on the skin and they leave a disturbing whitish tint. The cosmetic industry is, of course, really trying to solve this problem and the best solution so far is using nanoparticles. The itsy-bitsy Nano-sized particles improve both spreadability and reduce the whitish tint a lot, but unfortunately, it also introduces new health concerns.