jackhammer drilling rod in operation

One of the most important factors to consider when choosing a thread tap drill bit is the material it is made of. High-speed steel (HSS) drill bits are commonly used for general-purpose tapping in materials such as steel, aluminum, and brass. They are durable, heat-resistant, and can be sharpened for extended use. For hard materials like stainless steel or hardened steel, cobalt drill bits are recommended due to their superior hardness and heat resistance.

...

Once the material has been chosen, the focus shifts to the design. The dimensions of the sleeve must be precise to fit the shafts it will connect. Tolerances are measured in fractions of a millimeter, demonstrating the level of accuracy required. The design also needs to consider how the sleeve will be secured to the shafts. This could involve keys, setscrews, or other retention methods to prevent slippage or disconnection under load.

...

Furthermore, the threaded rod’s design incorporates a series of grooves running along its length. These grooves are not merely for aesthetic appeal; they play a crucial role in lubrication distribution. As the drill operates, lubricant travels through these channels, reducing friction and wear on the rod and bit As the drill operates, lubricant travels through these channels, reducing friction and wear on the rod and bit As the drill operates, lubricant travels through these channels, reducing friction and wear on the rod and bit As the drill operates, lubricant travels through these channels, reducing friction and wear on the rod and bitthreaded rock drill rod. This not only prolongs the lifespan of the equipment but also enhances drilling efficiency by minimizing the potential for jamming or breakage.

...

It was not until the development of the hydraulic drifter in the 1950s that rock drilling truly entered the modern eradrifter for rock drill. This innovative tool used high-pressure hydraulic fluid to power a piston that rotated the drill bit, allowing for much greater penetration rates and precision. The hydraulic drifter quickly became the go-to tool for drilling holes in hard rock, paving the way for many of the major engineering projects of the time.

...