It is most commonly used for commercial floors or walkways, and bridges. But it can also be used for ramps, wash bays, platforms, and jetties.
Pultruded gratings include:
Regular maintenance and inspection of shaft oil seals are essential to ensure their proper functioning and prevent costly downtime and repairs. Signs of a worn or damaged seal include oil leaks, increased noise or vibration, and decreased efficiency. If any of these symptoms are detected, it is important to replace the seal promptly to avoid further damage to the machinery.
First disconnect the battery earth terminal , to avoid the risk of a short circuit while the fuel pipes are disconnected.
While Viton offers a superior temperature and chemical range than other materials, it can be more expensive than the others as well. Let’s take a look at an alternative that is easier on the wallet, Polyacrylate.
EPDM oil seals are less common. They are used in solvent, hot water and steam applications, EPDM resists low temperatures down to -50 °C and UV radiation well. Some types of EPDM are also suitable for higher temperatures up to +150 °C. EPDM oil seals are usually available upon request.
To install an oil seal properly, the shaft must be undamaged. This is so the oil seal can do its job properly on the one hand, and to prevent it from being damaged during fitting on the other. In addition, it is very important to lubricate the shaft, the sealing lip and the bore with plenty of grease. This will allow the oil seal to slide more easily over the shaft and prevent dry running after the first rotation. The oil seal may also come into contact with the keyway, thread or other grooves when sliding over the shaft. By taping or covering the shaft at the location of these irregularities with oil-soaked paper, the oil seal can be mounted without damage to the sealing lip.