A safety review conducted by the EFSA in 2021 assessed thousands of studies published on titanium dioxide.

Anyway, it doesn't matter if it reflects or absorbs, Titanium Dioxide is a pretty awesome sunscreen agent for two main reasons: it gives a nice broad spectrum coverage and it's highly stable. Its protection is very good between 290 - 350 nm (UVB and UVA II range), and less good at 350-400 nm (UVA I) range. Regular sized Titanium Dioxide also has a great safety profile, it's non-irritating and is pretty much free from any health concerns (like estrogenic effect worries with some chemical filters).

The skin of an adult person is, in most places, covered with a relatively thick (∼10 μm) barrier of keratinised dead cells. One of the main questions is still whether TiO₂ NPs are able to penetrate into the deeper layers of the skin. The majority of studies suggest that TiO₂ NPs, neither uncoated nor coated (SiO₂, Al₂O₃ and SiO₂/Al₂O₃) of different crystalline structures, penetrate normal animal or human skin. However, in most of these studies the exposures were short term (up to 48 h); only few long-term or repeated exposure studies have been published. Wu et al.83 have shown that dermal application of nano-TiO₂ of different crystal structures and sizes (4–90 nm) to pig ears for 30 days did not result in penetration of NPs beyond deep epidermis. On the other hand, in the same study the authors reported dermal penetration of TiO₂ NPs with subsequent appearance of lesions in multiple organs in hairless mice, that were dermal exposed to nano-TiO₂ for 60 days. However, the relevance of this study for human exposure is not conclusive because hairless mice skin has abnormal hair follicles, and mice stratum corneum has higher lipid content than human stratum corneum, which may contribute to different penetration. Recently Sadrieh et al. performed a 4 week dermal exposure to three different TiO₂ particles (uncoated submicron-sized, uncoated nano-sized and coated nano-sized) in 5 % sunscreen formulation with minipigs. They found elevated titanium levels in epidermis, dermis and in inguinal lymph nodes, but not in precapsular and submandibular lymph nodes and in liver. With the energy dispersive X-ray spectrometry and transmission electron microscopy (TEM) analysis the authors confirmed presence of few TiO₂ particles in dermis and calculated that uncoated nano-sized TiO₂ particles observed in dermis represented only 0.00008 % of the total applied amount of TiO₂ particles. Based on the same assumptions used by the authors in their calculations it can be calculated that the total number of particles applied was 1.8 × 10¹³ /cm² and of these 1.4 x10⁷/cm² penetrated. The surface area of skin in humans is around 1.8 m²  and for sun protection the cream is applied over whole body, which would mean that 4 week usage of such cream with 5 % TiO₂ would result in penetration of totally 2.6 × 10¹⁰ particles. Although Sadrieh et al.concluded that there was no significant penetration of TiO₂ NPs through intact normal epidermis, the results are not completely confirmative.

Both calcium carbonate and titanium dioxide play crucial roles in various industries, but they are used for different purposes. Calcium carbonate is primarily used as a filler and pigment, while titanium dioxide is used as a whitening agent and pigment. Additionally, titanium dioxide is more expensive to produce than calcium carbonate due to its synthetic nature and complex manufacturing process.

Apart from the cosmetics industry, the coatings and plastics industry is also expected to contribute significantly to the growth of titanium dioxide in 2023. Coatings made from titanium dioxide offer excellent hiding power, durability and weather resistance, making them ideal for outdoor applications. Demand for high-quality coatings is expected to surge as the construction and automotive industries expand. Titanium dioxide is at the forefront of providing aesthetic and protective coatings, making it an indispensable ingredient in the industry.

Price increases of 139-174 USD /MT were seen in Q3 by western suppliers in a tight and buoyant market that faced multiple persistent pulls on supply, including an ongoing lack of Chinese export competitiveness. Furthermore, container constraints hampered its delivery to the rest of the world.

We've measured many different immunological markers, both in the mucosa of the intestine and the lymphoid organs part of the intestine and we didn't see any inflammation there or changes in white blood cell number, Kaminski said. They also looked at the spleen where titanium dioxide was taken up into the bloodstream. You would expect [titanium dioxide] would be filtered out in the spleen and maybe induce inflammation there, but we did not see that, Kaminski added.

How can I tell if a product has titanium dioxide in it? How can I avoid the ingredient?

The whole scientific experimental design in some of these studies is‌ very flawed, Kaminski said.

Scrap zinc or concentrated zinc ores are dissolved in sulfuric acid, the solution is purified, and the two solutions are reacted. A heavy mixed precipitate results that is 28 to 30% zinc sulfide and 72 to 70% barium sulfate.

1: Flocculation principle

As early as sixty years ago, zinc sulphide was first thought of as a pigment for coloring India rubber and a patent for the process of its manufacture was issued in England. But it was not until twenty years later that zinc sulphide and its manufacture was seriously considered as a pigment for paint, and in 1874 a patent was issued for a process of manufacturing a white pigment, composed of zinc sulphide and barium sulphate, known as Charlton white, also as Orr's white enamel. This was followed in 1876 by a patent issued to a manufacturer named Griffith and the product, which was similar in character to Charlton white, was known as Griffith's patent zinc white. In 1879 another patent for a more novel process was obtained by Griffith & Cawley, the product made under this process proving the best of the series placed upon the market up to that date. After that time many new processes were patented, all, however, tending to the same object, that of producing a white pigment, composed of zinc sulphide and barium carbonate, the results, however, in many cases ending with failure.