TiO₂ has been well accepted in the food industry and can be found as the E171 additive in various food products, mainly for whitening and texture. It is present in some cottage and Mozzarella cheeses, horseradish cream and sauces, lemon curd, and in low-fat products such as skimmed milk and ice-cream. Even if the product is labelled as containing E171, no information is usually given about the quantity, particle size and particle structure. FDA claims that TiO₂ may be safely used as a colour additive for colouring foods in quantities up to 1 % by weight of the food. Interestingly, TiO₂ is frequently declared as a “natural colouring agent” and is therefore well accepted by consumers.

Molecular weight: 412.23

As mentioned above, these oxide NPs are harmful in part because both anatase and rutile forms are semiconductors and produce ROS. Particularly, P25 kind has band-gap energies estimated of 3.2 and 3.0 eV, equivalent to radiation wavelengths of approximately 388 and 414 nm, respectively. Irradiation at these wavelengths or below produces a separation of charge, resulting in a hole in the valence band and a free electron in the conduction band, due to the electron movement from the valence to conduction bands. These hole–electron pairs generate ROS when they interact with H₂O or O₂ [43,44]. It was described that they can cause an increase in ROS levels after exposure to UV-visible light [45]. The NBT assay in the studied samples showed that bare P25TiO₂NPs produce a large amount of ROS, which is drastically reduced by functionalization with vitamin B2 (Fig. 5). This vitamin, also known as riboflavin, was discovered in 1872 as a yellow fluorescent pigment, [46] but its function as an essential vitamin for humans was established more than sixty years later, and its antioxidant capacity was not studied until the end of the XX century [47,48]. This antioxidant role in cells is partially explained because the glutathione reductase enzyme (GR) requires it for good functionality. This enzyme is the one in charge of the conversion of oxidized glutathione to its reduced form which acts as a powerful inner antioxidant and can quench the ROS [49,50]. The cost of this action is that the glutathione is converted to the oxidized form and needs to be recovered by the GR. Consequently, the cells need more vitamin B2. Another glutathione action is the protection against hydroperoxide. This activity is also mediated by riboflavin. Therefore, local delivery of this vitamin seems to significantly help the cells in their fight to keep the oxidative balance, once they are exposed to high levels of ROS.

Earlier this year, a bill was introduced in the California legislature to ban the manufacture, sale and distribution of foods in the state containing titanium dioxide, along with four other harmful food chemicals. 

2: Clarification mechanism of coagulant

Chemical coagulation is a process in which chemical agents (coagulants) are added to water treatment to make colloidal dispersion system destabilize and agglomerate. In the coagulation process, small suspended particles and colloidal impurities are aggregated into larger solid particles to separate particulate impurities from water, which is called coagulation clarification.

After adding coagulant into water, colloidal particles and other small particles can be polymerized into larger flocs through the comprehensive action of mixing, coagulation and flocculation. The whole process of coagulation and flocculation is called coagulation.

(1) Destabilization and condensation of colloids

Adding electrolyte to water can compress the electric double layer and destabilize the colloid. The main mechanism is that the electric double layer of colloidal particles in water is compressed or neutralized by adding aluminum salt or iron salt coagulant. The coagulant and raw water are mixed rapidly and evenly, and a series of chemical reactions are produced to destabilize. This process takes a short time, generally about 1 min. Some cationic polymers can also play a role in the destabilization and condensation of colloids in water. These polymers have a long chain structure and positive charge in water. Their destabilization and condensation of colloids in water is due to the interaction of van der Waals force adsorption and electrostatic attraction.

(2) Flocculation and formation of floc (alum)

The particle size of the initial flocculate formed by colloid destabilization and coagulation in water is generally more than 1 m. at this time, Brownian motion can no longer push them to collide and form larger particles. In order to make the initial flocs collide with each other to form large flocs, it is necessary to input additional energy into the water to produce a velocity gradient. Sometimes it is necessary to add organic polymer flocculant into water, and the adsorption bridging effect of long chain molecules of flocculant is used to improve the probability of collision and adhesion. Flocculation efficiency usually increases with the increase of flocculate concentration and flocculation time.

Compared with polyaluminum chloride, polyaluminum chloride has the advantages of high density, fast settling speed and wide pH adaptability; the coagulation effect is less affected by temperature than that of polyaluminum sulfate; however, when adding ferric salt, it should be noted that when the equipment is not in normal operation, the iron ions will make the effluent color, and may pollute the subsequent desalination equipment.

The global Lithopone market was valued at $169.8 million in 2019, and is projected to reach $218.6 million by 2027, growing at a CAGR of 3.30% from 2020 to 2027.

Titanium dioxide is typically micronized and coated for use in cosmetics products. The micronizing makes this somewhat heavy-feeling ingredient easier to spread on skin, plus a bit more cosmetically elegant. Micronized titanium dioxide is much more stable and can provide better sun protection than non-micronized titanium dioxide.

The Lithopone market is segmented into application, and region. The major applications studied in the global Lithopone market report include paints & coatings, plastics, printing inks, paper & pulps, rubber, leather, linoleum, and others. Region-wise, the market is studied across North America, Europe, Asia-Pacific, and LAMEA. 

Lithopone was discovered in the 1870s by DuPont. It was manufactured by Krebs Pigments and Chemical Company and other companies.^[2] The material came in different seals, which varied in the content of zinc sulfide. Gold seal and Bronze seals contain 40-50% zinc sulfide, offering more hiding power and strength.^[3] Although its popularity peaked around 1920, approximately 223,352 tons were produced in 1990. It is mainly used in paints, putty, and in plastics.^[1]

Europe