Additionally, its durability ensures that it can withstand heavy-duty use without bending or breaking Additionally, its durability ensures that it can withstand heavy-duty use without bending or breakinghexagonal drill rod.
There is a British Standard laid down for the control of synthetic rubbers. BS 3574 (1989) helps to determine shelf life – for instance, Nitrile (NBR) and Polyacrylic (ACM) are Group ‘B’ rubbers and have a 7-year life, whilst Silicone (VMQ) and Fluoroelastomers (Viton®) are Group ‘C’ rubbers and have a 10-year shelf life. PTFE and Leather do not come into this category but like the others should be kept in the original packing for as long as possible away from direct light, dust, and humidity. Ozone, which can also be produced by battery-driven forklift trucks has a very bad effect on synthetic rubbers. Finally, protect the sealing lip – DO NOT hang the seals on nails, wire etc.
The material of the sealing lip is chosen according to the liquid to be sealed and the rotational speed. For larger shafts, an NBR sealing lip can cope with surface speeds of up to 10-12 m/s, while an FKM lip is suitable for speeds of up to 35-38 m/s.
Oil seals are made out of nitrile synthetic rubber with steel stiffener rings. Other rubbers such as viton, silicon, neoprene or poly acrylic can be used for specific applications. The stiffener rings may be stainless steel or brass where highly corrosive fluids are to be sealed. Springs are generally made of spring steel to IS: 4454:Gr.ll or from stainless steel or bronze for corrosion resistance
The most important function of an oil seal is to protect all types of sleeves, roller bearings, and balls located in the rotary shafts. These seals also prevent two fluids from mixing, such as water and oil.
• High eccentricity-following lip shape
This technique involves aligning the installation tool with the face of the shaft to precisely position the seal. Double-checking alignment after installation is essential to avoid future misalignment issues.