mold

The Evolution and Significance of Coal Mine Tools

One of the key applications of the hand-held rock drill is in mining operations, where it is used to extract minerals and ore from underground deposits. Miners rely on this tool to create blast holes or access tunnels in hard rock formations, allowing them to safely and efficiently extract valuable resources. The hand-held rock drill is also commonly used in construction projects to bore holes for anchors, bolts, or posts in concrete or rock structures.

2. Stainless steel 316 material should be used in coastal areas, which can resist corrosion of sea water.
1. The surface of the stainless steel pet cage is deposited with dust or alien metal particles containing other metal elements. In the humid air, the condensed water between the attachment and stainless steel will connect the two into a micro cell, which causes the electrochemical reaction and the protective film is destroyed, which is called electrochemical corrosion. To avoid this situation, as long as the stainless steel surface is clean, you can ensure that the stainless steel pet cage does not rust.
Although to be able to reduce the cost of production, but the overall strength of the product will have a great lack, so in this case will also let it have a great strength drop. Of course, in the mall, the higher the intensity of the data in the production of the higher the implementation of norms, naturally there will be certain progress in the price.
Post time: 09-05-23
In use, it can be well used to control the degree of softness and hardness in the annealing process, mainly used for binding silk and binding wire in the construction industry. Its use is not limited to handicrafts, of course, in the construction industry is also widely used. In the early days, the lanterns were made with wire outside and proper candles were placed inside. People hung them in front of the door and it was very beautiful to go up at night.
Post time: 02-11-22
Hot dip galvanized wire: This product uses excellent carbon structural steel, through drawing, hot dip galvanized processing. Widely used in the manufacture of wire mesh, highway barrier and construction projects. With thick coating, corrosion resistance construction binding with iron wire is 22# (0.71mm), low price, its characteristics of good flexibility, not easy to break, is one of the most ideal binding wire construction industry, the first choice of low zinc cold plating treatment of iron wire. The primary choice of low zinc cold plating treatment of wire.
2. When the weather is too dry and humid, remember to blow dry the cage or move it to a place with heating to prevent dry crack damage.
Post time: 10-11-22
Plastic coated electric welding net: PVC plastic coated electric welding net is a kind of tall welding net, plastic coated electric welding net picture on the upper part of the protective barbed net, network cable is galvanized steel wire, plus PVC plastic treatment, in the protection of beautiful at the same time, ensure the firm and durable. Material: low carbon steel wire, PVC plastic coating manufacturing process: steel wire after welding plastic coating, can also be separate electroplating, hot plating and plastic coating. PVC plastic coated electric welding net use: industrial, agricultural, municipal, transportation and other industries of fence, decoration, protection and other facilities. PVC plastic coated electric welding mesh features: good corrosion resistance, strong weather resistance, anti-aging, beautiful and generous. Installation is simple and quick.
And high quality data and production cost and production conditions are bound, so some welding screen manufacturers did not meet the requirements of this aspect, natural in this case there is no way to improve product strength. In addition to data, and produce process, even if again good data, but the factory did not meet the requirements of production process in welding, also can form the product under the high pressure welding, so it is also a kind of strength on the decline, process conditions of different manufacturers also have very big difference, so it formed a shopping mall on the above products are differences of strength.
2. Check the stabbing rope of the blade on time
Many pet carriers are designed with a small box in the base, so that pets can clean up when they poop. At the same time, it is also convenient for pet hygiene. For example, if there is no leakage of excrement in the box, pet excrement will be on the ground, which is quite unsanitary. If you have a box you can easily take it out and clean it out so it doesn’t get all over the place, so it’s more hygienic.
Post time: 30-01-23
Traditional wire mesh is crisscross woven into the wire, with the development of the economy, the rapid rise of all walks of life, the use of traditional wire mesh limitations gradually exposed, such as: aquaculture, to the chicken circle a cage can not be too dense, the wire can not be too thick, woven up the net wire once the mesh is too large net surface will become soft.
Two, the production process is different
1. The diameter of the raw material and the thickness of the diameter are directly affected;
Post time: 26-04-23
Now it is more used in the binding of the construction industry. Compared with ordinary iron wire, it is softer and has better luster. Use in daily life does not need to carry out maintenance and maintenance, save a lot of time, but also save the cost of maintenance and maintenance. Annealed wire has good stability, good corrosion resistance, greatly prolonging the service life. More kinds, can be selected according to different uses, making annealing wire device is simple, improve the utilization rate of the device. The material properties of annealed wire can meet different processing requirements.
Plastic spraying is often referred to as electrostatic powder spraying. It is the use of electrostatic emitter to make plastic powder charged, adsorbed on the surface of the iron plate, and then baked at 180~220℃ to melt the powder and adhere to the metal surface. Plastic spraying products are mostly used in indoor boxes, and the paint film appears flat or matte. Spray powder mainly acrylic powder, polyester powder and so on.
Post time: 30-03-23
The production process of stainless steel blade barbed wire is basically similar to that of galvanized blade barbed wire, and the blade size is usually determined according to the mold.
3. Before cleaning the cage, put the birds in a safe place, and then clean out the garbage inside the cage. Clean it up with a sweep. Then use a wet rag to clean on site.
The production process of stainless steel blade and galvanized blade is basically similar. The blade size is usually determined according to the mold.
3. Acid activation acid activation solution should be able to remove corrosion products and oxide film (skin) on the surface of parts, without excessive corrosion on the matrix.
Post time: 28-09-22
The production and processing process of blade barbed rope is tedious, which requires the cooperation of all departments, and the production cycle is relatively long. The barbed rope, whether galvanized barbed rope or stainless steel barbed rope, due to the relatively simple structure, the degree of mechanization in the production process is relatively high, so this is also a big difference in the price.
Cold galvanizing (galvanizing) is in the plating tank after the current unidirectional, so that the zinc gradually plated on the metal surface, slow production speed, uniform coating, thin thickness, usually as long as 3-15g, bright appearance, poor corrosion resistance, usually a few months will rust. Compared with hot dip galvanizing, the production cost of electric galvanizing is lower.
Galvanized wire coating rough, passivation film is not bright, bath temperature is too high. If the cathode current density is too high, zinc content in the bath is too high or sodium hydroxide and DPE content is too low; Solid particles or excessive foreign metal impurities in the electroplating solution can cause such problems. Solution: If the coating of large galvanized wire is rough, there may be solid particles in the plating solution. If the roughness of the part is severe, the current density may be too high.