Moreover, GRP playground equipment often includes features like climbing walls, monkey bars, and bridges that challenge children physically
Post time: 16-12-22- The cleaning agent used for cleaning has no effect on the adhesion of the coating and no corrosion on the base material. Acid activation Acid activation solution should be able to remove corrosion products and oxide film from the surface of parts without excessive corrosion of the matrix. Zinc plating may be zinc plated with zincate or chloride and appropriate additives shall be used to obtain a coating that meets the requirements of this standard. After light plating, light treatment is carried out. Passivated parts requiring hydrogen removal shall be passivated after hydrogen removal. Activation with 1% H2SO4 or 1% hydrochloric acid for 5 ~ 15s prior to passivation.
1, stress relief before plating where the maximum tensile strength is greater than 1034Mpa key and important parts before plating should be at 200±10℃ stress relief for more than 1 hours, carburizing or surface quenching parts should be at 140±10℃ stress relief for more than 5 hours.
The amount of zinc on the surface of high zinc barbed rope is about 5 times that of general zinc barbed rope, thus greatly prolonging the time of rust resistance. In the appearance of the two products are silver white and metal texture is better, for the distinction between the two products is more difficult to distinguish if it is a layman, but for long-term work of professionals can be separated from the two at a glance.
Wire flexibility and elongation is good, can withstand the pressure of mechanical operation, in our country’s industry has played a very important role. There are many kinds of iron wire, the most common is to give black iron wire, galvanized iron wire. The corrosion resistance of the outer coating is effectively improved, but the phenomenon of crevice corrosion will be found after long-term use.
- More network is the application of the stone cage net, stone cage net because it is used in water conservancy engineering more, so the anticorrosion performance requirements for wire is relatively high, so the general use of zinc aluminum alloy wire or high galvanized wire. Common wire diameter has 2.0mm, 2.2mm, 2.5,mm, 2.7mm and so on.
Blade thorn rope because the volume is relatively large so thorn rope factory is used to packaging treatment.
Post time: 31-08-22- (3) For some use of special paint spraying should be baked, of course, depending on the size of the area, small can be placed in the oven, large can only be dried first, and then to dry parts for processing, lock baking, if other circumstances can only use high temperature tools bit by bit baking. The products that can be baked in the oven should be leveled at room temperature for 15 to 30 minutes, baked at a low temperature of 60 degrees Celsius for half an hour, and then baked at the reserved baking temperature for one and a half hours, and then cooled down.
- 3. Kinks caused by uncontrolled relaxation should be avoided
- Compared with the traditional braided barbed rope, the blade barbed rope has a relatively complex technology and a relatively high cost of raw materials.
- 5, do not pull the wire beyond the plastic limit.
Post time: 08-07-22The use of bundled galvanized wire with the development of industry and agriculture also expanded accordingly. Therefore, galvanized wire products in the industry, such as chemical equipment, oil processing, Marine exploration, transport, electricity, shipbuilding, metal structure, etc.), agriculture (such as sprinkler irrigation, dim room, building (such as water and gas transport, wire casing, scaffolding, house, etc.), Bridges, shipping, etc., has been widely use in recent years. Because galvanized wire goods have beautiful surface, good corrosion resistance and other characteristics, its use scale is more and more extensive.
- 1, the width and length of the hexagonal net (according to your actual needs, the width and length we can adjust flexibly).
- Reverse twisting of the barbed rope: first wrap the barbed wire around the main wire (that is, a single piece of iron wire) and then add an iron wire and twist together to form a double strand of barbed rope.
Post time: 19-12-22- 2.0*2.0mm 12 meters per kilogram
- The common thorn rope is double strand thorn rope, models are 2.0*2.0mm, 2.25*2.25mm, 2.7*2.25mm three, and are galvanized thorn rope (plastic coated thorn rope is rarely used), the thorn distance (that is, the distance between winding wire) is generally 14 cm. Let’s take a look at what these models mean:
- The uniformity of galvanized wire is reflected in what aspects:
Post time: 27-05-22- Although to be able to reduce the cost of production, but the overall strength of the product will have a great lack, so in this case will also let it have a great strength drop. Of course, in the mall, the higher the intensity of the data in the production of the higher the implementation of norms, naturally there will be certain progress in the price.
Post time: 18-11-22- Heavy hexagonal mesh is made of low carbon steel wire galvanized large wire braided, the tensile strength of steel wire is not less than 38kg/m2, the diameter of steel wire can reach 2.0mm-3.2mm, the surface of steel wire is usually hot galvanized protection, galvanized amount can reach 500g/m2.
The characteristics of hexagonal wire mesh: strong structure, flat surface, with good corrosion resistance, oxidation resistance and so on.
- Arrived in other ways can’t end effect of the inclination of hook flower network structure in essence is void, water permeability, the natural effect of groundwater and filtering effect has a strong inclusive, suspended in the water content and silt accumulation in fill in crevices, applied to mountain protection, is conducive to the growth of natural plant, beautify the grass spraying to arrive late his curing effect, Gradually restoring the original ecological environment is a perfect connection between beautification and protection.
- The principle of hot dip galvanizing is simply that clean iron parts are immersed in a zinc bath through Flux wetting, so that the steel reacts with molten zinc to produce an alloyed skin film.
Post time: 10-10-22
Post time: 13-12-22- In this temperature range, the zinc solution is severely corroded to the workpiece and the zinc pot, and the iron is lost at 560 degrees Celsius to add obviously, and the zinc will be the iron substrate above 660 degrees Celsius, zinc slag will be added quickly, plating cannot be used. Therefore, electroplating is carried out in the range of 430~450 degrees Celsius.