2019 Good Quality Molded Fiberglass Grating – Mandrels and Molds – Jrain
2019 Good Quality Molded Fiberglass Grating – Mandrels and Molds – Jrain Detail:
Jrain offers a wide range of mandrels and molds.
Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds.
Other molds for fittings are mainly used for hand lay-up process.
Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durability.
Smooth surface together with a certain of taper and the demolding agent make the demolding process easy, and save a lot of labor and time, and increase the product quality.
Steel pipe mandrel can realize:
Wall thickness: >=7mm
Taper: +/-1.0mm
Steel + FRP pipe mandrel can be used for longer time, as the steel structure give strong support and the FRP surface can be repaired for small defects.
Our mandrels and molds are conformed to national standards. They are with high accuracy and not easy to deform, and as a result, can serve for longer time.
The pipe mandrel can be used for producing the following connection type: plain ends, adhesive bonded, rubber seal lock joint and rubber seal joint, bell and spigot joint, etc.
Except the normal molds, Jrain provides contractile molds also.
Other special molds are available upon request.
Jrain’s mandrels and molds supplied shall be of the best quality, completely new and reliable and the type selection complies with requirement of process technology as well as normal and safe operation and their long term service.
Product detail pictures:
Related Product Guide:
We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for 2019 Good Quality Molded Fiberglass Grating – Mandrels and Molds – Jrain , The product will supply to all over the world, such as: Atlanta, Sacramento, Cannes, Our products have enjoyed a great reputation for their good quality, competitive prices and prompt shipment in international market. Presently, we are sincerely looking forward to cooperating with more overseas customers based on mutual benefits.
By Mag from Detroit - 2018.12.11 11:26
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Andrea from Tanzania - 2018.06.26 19:27
Related products
-
2019 China New Design GRP Ladder - Gratings &a...
Jrain panels are molded in one piece and feature a concave non-slip walking surface. The cost effective panels allow for efficient on-site cutting to minimize grating waste and load bearing bars in both directions allow for use without continuous side support. Jrain’s molded fiberglass grating is significantly lighter in weight than metallic gratings and the high resin content provides excellent corrosion resistance and requires very little maintenance. A higher safety factor is achieve...
-
Chinese Professional GRP Grating - Gratings &a...
Jrain panels are molded in one piece and feature a concave non-slip walking surface. The cost effective panels allow for efficient on-site cutting to minimize grating waste and load bearing bars in both directions allow for use without continuous side support. Jrain’s molded fiberglass grating is significantly lighter in weight than metallic gratings and the high resin content provides excellent corrosion resistance and requires very little maintenance. A higher safety factor is achieve...
-
Factory wholesale Insulated Frp Covers - Grati...
Jrain panels are molded in one piece and feature a concave non-slip walking surface. The cost effective panels allow for efficient on-site cutting to minimize grating waste and load bearing bars in both directions allow for use without continuous side support. Jrain’s molded fiberglass grating is significantly lighter in weight than metallic gratings and the high resin content provides excellent corrosion resistance and requires very little maintenance. A higher safety factor is achieve...
-
New Arrival China Frp Pipeline - Duct System &...
Jrain can design the custom, pre-fabricated fiberglass ducts by modern software such as FEA (Finite Element Analysis), Auto CAD, etc. Then Jrain can fabricate the ducts for different features according to specific designs: 1． Abrasion resistant duct for FGD power market applications; 2． Hand lay-up or helically wound; 3． Multiple resin to handle a variety of corrosive environments 4． Fire retardant resin to achieve class 1 flame spread 5． Design engineering, calculations, CAD design, FEA...
-
Manufacturer for GRP Pipes and Fittings for Shi...
Fiberglass fittings are generally made of hand lay-up process, with high resin content. Different shapes can be realized by using molds. Different resins can be selected for different medium and service conditions. Any special fittings on sizes and shapes will be available upon request. Fiberglass fittings are very popular as they are featured by: • Great strength in relation to the weight • Electrical and thermal insulation • Resistant to corrosion and chemicals • Resistant to the influences...
-
Newly Arrival Fiberglass Drum - Fans & Dam...
Fiberglass dampers are used to regulate air flow or shut off and isolate a system. Generally vinyl ester resins are used. When necessary, fire retardant resins are also available for class 1 flame spread. Fiberglass dampers are customized products, be made by hand lay-up process upon mold in most cases. Available in various sizes and shapes With or without actuators The shaft is made of stainless steel or carbon steel in general. Fiberglass demister will connect to a damper / seal valve wit...
