2019 High quality FRP Storage Tank - Large Size Field Tanks – Jrain
2019 High quality FRP Storage Tank - Large Size Field Tanks – Jrain Detail:
The typical process for large size field tanks is:
1. Mobilize the manufacturing team and appoint Project Manager; Ship the machines and materials to project field.
2. Assembly the winding machine and mold at project field according to diameter of tank to be made.
3. Make liner and do winding work according to designed data.
4. Demoulding and then placing the tank to the right place.
5. Install the fittings such as nozzles, ladders, handrails, etc., and do hydrostatic test. Finally hand over to customer.
Jrain is equipped with highly customized winding machines and molds for field manufacturing of fiberglass tanks and vessels. The mechanical properties of the laminates obtained with the field winding equipment are identical to the properties of the laminates produced in workshop. Project schedule must include time to set-up mobile winding machines.
Different resins and fiberglass will be selected when designing the products for the storage and processing of corrosive or abrasive liquids and gases. Different agents and fillers can be used to meet different intended service conditions when required.
Field fabrication and installation can be highly cost-effective, and often overcome size and difficult access problems. On-site manufacturing can minimize transportation costs and can be effectively coordinated with other on-site contractors.
Jrain is rich experienced with manufacturing of large size FRP tanks and vessels at both Chinese and oversea project sites under different environments.
When hand over the machines to customer, Jrain can provide training about the machine usage if required.
Main standards we can follow:
• ASME RTP-1 • ASTM D3299 • ASTM D4097 • BS EN 13121
Product detail pictures:
Related Product Guide:
We always continually offer you by far the most conscientious customer service, and the widest variety of designs and styles with finest materials. These attempts include the availability of customized designs with speed and dispatch for 2019 High quality FRP Storage Tank - Large Size Field Tanks – Jrain , The product will supply to all over the world, such as: Jeddah, Nepal, Los Angeles, Abiding by our motto of "Hold well the quality and services, Customers Satisfaction", So we give our clients with high quality products and solutions and excellent service. Be sure to feel free to contact us for further information.
By Ina from Bolivia - 2018.11.11 19:52
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Edward from India - 2018.11.02 11:11
Related products
-
High definition PVC FRP Tank - Oblate Tanks &#...
Jrain has our own sophisticated production techniques enabling tanks to be transported at once. Such tanks are manufactured in different sections which can be assembled on site. The compressed shells will be unfolded through special way and bonded together at job site. Except the common advantages of fiberglass tanks, the oblate tanks are also featured by: Solved road transportation problem; Fabricated the components as most as possible at workshop; Minimized the field work; Cost effective; ...
-
Factory wholesale Fiberglass Shell - Car and B...
Because of many advantages like below, fiberglass car and boat are very hot products recently in many industries such as transportation, building, electronics, toy cars, yacht, fishing and so on. In addition, as the development of environmental protection awareness, almost every country limit the trees cutting, which pushed the fiberglass boats manufacturing as the fiberglass is the ideal material to construct the middle and small boats. The related accessories for fiberglass cars include bum...
-
Good quality Frp Water Tank - Insulation Tanks...
Should insulation be required, it is a simple task to equip the tanks with a 50mm PU foam layer covered by a 5mm FRP layer. This method of insulation produces a K value of 0.5W/m2K. If needed the thickness can be adjusted, for example to 100mm PU foam (0.3W/m2K). But the thickness of insulation is generally to be 30-50mm, while the thickness of outer protection cover can be 3-5mm. FRP tank is strength higher than that of steel, casting iron, plastic and so on. Therefore, by combining the insu...
-
Good Quality FRP Dual Lamination Product - Dua...
Dual laminate FRP (fiberglass reinforced plastic) combines the outstanding strength of FRP with the high chemical resistance of a thermoplastics inner shell. Combining the strength of FRP and the chemical compatibility of plastics provides customers with a superior alternative to costly metal alloys and rubber-lined steel. Choice of thermoplastic inner shell materials allows a wide range of chemical resistance and operating conditions to be accommodated. The liner is thermoformed and welded a...
-
Top Suppliers Small Fiberglass Tanks - Large S...
The typical process for large size field tanks is: 1. Mobilize the manufacturing team and appoint Project Manager; Ship the machines and materials to project field. 2. Assembly the winding machine and mold at project field according to diameter of tank to be made. 3. Make liner and do winding work according to designed data. 4. Demoulding and then placing the tank to the right place. 5. Install the fittings such as nozzles, ladders, handrails, etc., and do hydrostatic test. Finally hand over...
-
Best quality Plastic Grating For Walkways - La...
Fiberglass ladders and handrails have many advantages like below: 1. High strength and impact resisting: compared with steel, the strength of fiberglass is almost same. But fiberglass ladders and handrails can recover after impact because of the good elasticity. 2. Corrosion resistance: Based on actual situations and service conditions, orthophthalic resin, isophthalic resin and vinylester resin can be selected, and so they can be used for long time under the strong acid and alkali environmen...
