2019 High quality Molded Fiberglass - Mandrels and Molds – Jrain
2019 High quality Molded Fiberglass - Mandrels and Molds – Jrain Detail:
Jrain offers a wide range of mandrels and molds.
Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds.
Other molds for fittings are mainly used for hand lay-up process.
Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durability.
Smooth surface together with a certain of taper and the demolding agent make the demolding process easy, and save a lot of labor and time, and increase the product quality.
Steel pipe mandrel can realize:
Wall thickness: >=7mm
Taper: +/-1.0mm
Steel + FRP pipe mandrel can be used for longer time, as the steel structure give strong support and the FRP surface can be repaired for small defects.
Our mandrels and molds are conformed to national standards. They are with high accuracy and not easy to deform, and as a result, can serve for longer time.
The pipe mandrel can be used for producing the following connection type: plain ends, adhesive bonded, rubber seal lock joint and rubber seal joint, bell and spigot joint, etc.
Except the normal molds, Jrain provides contractile molds also.
Other special molds are available upon request.
Jrain’s mandrels and molds supplied shall be of the best quality, completely new and reliable and the type selection complies with requirement of process technology as well as normal and safe operation and their long term service.
Product detail pictures:
Related Product Guide:
With our loaded working experience and thoughtful products and services, we've got been acknowledged as a reputable supplier for most international buyers for 2019 High quality Molded Fiberglass - Mandrels and Molds – Jrain , The product will supply to all over the world, such as: Mozambique, Romania, New Zealand, With strong technical strength and advanced production equipment, and SMS people purposefully , qualified, dedicated spirit of enterprise. Enterprises took the lead through the ISO 9001:2008 international quality management system certification, CE certification EU ; CCC.SGS.CQC other related product certification. We look forward to reactivating our company connection.
By Pandora from Puerto Rico - 2018.09.29 17:23
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Freda from Belarus - 2018.09.23 18:44
Related products
-
OEM/ODM Supplier Fiberglass Duct Corrosion Resi...
Fiberglass pipes include pure fiberglass pipes, sand pipes, insulation pipe, dual laminate pipe (with PVC, CPVC, PE, PP, PVDF, etc.) and so on The wall construction of a fiberglass pipe system consists of three layers: 1． Liner: determines the optimal resistance to the medium. 2． Structural layer: provides high mechanical strength and resistance to loads. 3． Top coat: protects the piping system from weather, chemical penetration and UV radiation. They are very popular in many industries be...
-
Chinese wholesale FRP Boat - Other Products &#...
Main process includes hand lay-up process, vacuum infusion process, winding, etc. Because of its corrosion resistance and versatility, fiberglass reinforced plastic (FRP) is a popular material for many different industries like chemical and pharmaceutical engineering, semiconductor production, refineries and paper mills, etc. If use the food grade resin, the fiberglass products can also be used for drinking water, food, say sauce, fermentation, wine, etc. The detailed features of fiberglass c...
-
Manufacturer for GRP Pipes and Fittings for Shi...
Fiberglass fittings are generally made of hand lay-up process, with high resin content. Different shapes can be realized by using molds. Different resins can be selected for different medium and service conditions. Any special fittings on sizes and shapes will be available upon request. Fiberglass fittings are very popular as they are featured by: • Great strength in relation to the weight • Electrical and thermal insulation • Resistant to corrosion and chemicals • Resistant to the influences...
-
China New Product Fiberglass Launder - Fans &a...
Fiberglass dampers are used to regulate air flow or shut off and isolate a system. Generally vinyl ester resins are used. When necessary, fire retardant resins are also available for class 1 flame spread. Fiberglass dampers are customized products, be made by hand lay-up process upon mold in most cases. Available in various sizes and shapes With or without actuators The shaft is made of stainless steel or carbon steel in general. Fiberglass demister will connect to a damper / seal valve wit...
-
100% Original Fiberglass Reinforced Plastic Tan...
Jrain has our own sophisticated production techniques enabling tanks to be transported at once. Such tanks are manufactured in different sections which can be assembled on site. The compressed shells will be unfolded through special way and bonded together at job site. Except the common advantages of fiberglass tanks, the oblate tanks are also featured by: Solved road transportation problem; Fabricated the components as most as possible at workshop; Minimized the field work; Cost effective; ...
-
2019 wholesale price GRP Pipe - Fittings ̵...
Fiberglass fittings are generally made of hand lay-up process, with high resin content. Different shapes can be realized by using molds. Different resins can be selected for different medium and service conditions. Any special fittings on sizes and shapes will be available upon request. Fiberglass fittings are very popular as they are featured by: • Great strength in relation to the weight • Electrical and thermal insulation • Resistant to corrosion and chemicals • Resistant to the influences...
