2019 High quality Molded Fiberglass - Mandrels and Molds – Jrain
2019 High quality Molded Fiberglass - Mandrels and Molds – Jrain Detail:
Jrain offers a wide range of mandrels and molds.
Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds.
Other molds for fittings are mainly used for hand lay-up process.
Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durability.
Smooth surface together with a certain of taper and the demolding agent make the demolding process easy, and save a lot of labor and time, and increase the product quality.
Steel pipe mandrel can realize:
Wall thickness: >=7mm
Taper: +/-1.0mm
Steel + FRP pipe mandrel can be used for longer time, as the steel structure give strong support and the FRP surface can be repaired for small defects.
Our mandrels and molds are conformed to national standards. They are with high accuracy and not easy to deform, and as a result, can serve for longer time.
The pipe mandrel can be used for producing the following connection type: plain ends, adhesive bonded, rubber seal lock joint and rubber seal joint, bell and spigot joint, etc.
Except the normal molds, Jrain provides contractile molds also.
Other special molds are available upon request.
Jrain’s mandrels and molds supplied shall be of the best quality, completely new and reliable and the type selection complies with requirement of process technology as well as normal and safe operation and their long term service.
Product detail pictures:
Related Product Guide:
All we do is usually affiliated with our tenet " Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for 2019 High quality Molded Fiberglass - Mandrels and Molds – Jrain , The product will supply to all over the world, such as: Jamaica, Chicago, California, "Good quality and reasonable price" are our business principles. If you are interested in our products or have any questions, please feel free to contact us. We hope to establish cooperative relationships with you in the near future.
By Klemen Hrovat from UAE - 2017.05.21 12:31
Staff is skilled, well-equipped, process is specification, products meet the requirements and delivery is guaranteed, a best partner!
By Mignon from Switzerland - 2017.08.28 16:02
Related products
-
China New Product Fiberglass Launder - Covers ...
Fiberglass covers are widely used in water and sewage treatment, chemical and petroleum, food, pharmacy, etc. Fiberglass covers are different in colors and shapes such as round, rectangular, arch, flat, house type, etc. as per customer’s requirements. Fiberglass covers are always designed to meet a wide range of temperature, the outer surface finish is remarkable resistant to harsh environmental conditions, making fiberglass an ideal material for exposure to the elements, including the sun, s...
-
Online Exporter FRP Moisture Trap - Covers ...
Fiberglass covers are widely used in water and sewage treatment, chemical and petroleum, food, pharmacy, etc. Fiberglass covers are different in colors and shapes such as round, rectangular, arch, flat, house type, etc. as per customer’s requirements. Fiberglass covers are always designed to meet a wide range of temperature, the outer surface finish is remarkable resistant to harsh environmental conditions, making fiberglass an ideal material for exposure to the elements, including the sun, s...
-
OEM Supply Fiberglass Holding Tanks - Insulati...
Should insulation be required, it is a simple task to equip the tanks with a 50mm PU foam layer covered by a 5mm FRP layer. This method of insulation produces a K value of 0.5W/m2K. If needed the thickness can be adjusted, for example to 100mm PU foam (0.3W/m2K). But the thickness of insulation is generally to be 30-50mm, while the thickness of outer protection cover can be 3-5mm. FRP tank is strength higher than that of steel, casting iron, plastic and so on. Therefore, by combining the insu...
-
Hot New Products Fiberglass Handrail - Grating...
Jrain panels are molded in one piece and feature a concave non-slip walking surface. The cost effective panels allow for efficient on-site cutting to minimize grating waste and load bearing bars in both directions allow for use without continuous side support. Jrain’s molded fiberglass grating is significantly lighter in weight than metallic gratings and the high resin content provides excellent corrosion resistance and requires very little maintenance. A higher safety factor is achieve...
-
Factory Cheap Hot FRP Chemical Product - Car a...
Because of many advantages like below, fiberglass car and boat are very hot products recently in many industries such as transportation, building, electronics, toy cars, yacht, fishing and so on. In addition, as the development of environmental protection awareness, almost every country limit the trees cutting, which pushed the fiberglass boats manufacturing as the fiberglass is the ideal material to construct the middle and small boats. The related accessories for fiberglass cars include bum...
-
Good Quality FRP Tank - Insulation Tanks ̵...
Should insulation be required, it is a simple task to equip the tanks with a 50mm PU foam layer covered by a 5mm FRP layer. This method of insulation produces a K value of 0.5W/m2K. If needed the thickness can be adjusted, for example to 100mm PU foam (0.3W/m2K). But the thickness of insulation is generally to be 30-50mm, while the thickness of outer protection cover can be 3-5mm. FRP tank is strength higher than that of steel, casting iron, plastic and so on. Therefore, by combining the insu...
