2019 wholesale price Molded Grating - Mandrels and Molds – Jrain
2019 wholesale price Molded Grating - Mandrels and Molds – Jrain Detail:
Jrain offers a wide range of mandrels and molds.
Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds.
Other molds for fittings are mainly used for hand lay-up process.
Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durability.
Smooth surface together with a certain of taper and the demolding agent make the demolding process easy, and save a lot of labor and time, and increase the product quality.
Steel pipe mandrel can realize:
Wall thickness: >=7mm
Taper: +/-1.0mm
Steel + FRP pipe mandrel can be used for longer time, as the steel structure give strong support and the FRP surface can be repaired for small defects.
Our mandrels and molds are conformed to national standards. They are with high accuracy and not easy to deform, and as a result, can serve for longer time.
The pipe mandrel can be used for producing the following connection type: plain ends, adhesive bonded, rubber seal lock joint and rubber seal joint, bell and spigot joint, etc.
Except the normal molds, Jrain provides contractile molds also.
Other special molds are available upon request.
Jrain’s mandrels and molds supplied shall be of the best quality, completely new and reliable and the type selection complies with requirement of process technology as well as normal and safe operation and their long term service.
Product detail pictures:
Related Product Guide:
Our intention is usually to satisfy our buyers by offering golden provider, great rate and good quality for 2019 wholesale price Molded Grating - Mandrels and Molds – Jrain , The product will supply to all over the world, such as: US, Qatar, Latvia, Customer satisfaction is our goal. We are looking forward to cooperating with you and providing our best services to suit your needs. We warmly welcome you to contact us and make sure you feel free to contact us. Browse our online showroom to see what we can do for you. And then E-mail us your specs or inquiries today.
By Cheryl from Albania - 2018.12.28 15:18
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Sharon from Singapore - 2017.05.21 12:31
Related products
-
Europe style for Frp Composite Panels - Fans &...
Fiberglass dampers are used to regulate air flow or shut off and isolate a system. Generally vinyl ester resins are used. When necessary, fire retardant resins are also available for class 1 flame spread. Fiberglass dampers are customized products, be made by hand lay-up process upon mold in most cases. Available in various sizes and shapes With or without actuators The shaft is made of stainless steel or carbon steel in general. Fiberglass demister will connect to a damper / seal valve wit...
-
2019 High quality Molded Fiberglass - Mandrels...
Jrain offers a wide range of mandrels and molds. Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds. Other molds for fittings are mainly used for hand lay-up process. Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durabili...
-
Best quality Plastic Grating For Walkways - Gr...
Jrain panels are molded in one piece and feature a concave non-slip walking surface. The cost effective panels allow for efficient on-site cutting to minimize grating waste and load bearing bars in both directions allow for use without continuous side support. Jrain’s molded fiberglass grating is significantly lighter in weight than metallic gratings and the high resin content provides excellent corrosion resistance and requires very little maintenance. A higher safety factor is achieve...
-
Top Suppliers GRP Products for Thermal and Nucl...
Main process includes hand lay-up process, vacuum infusion process, winding, etc. Because of its corrosion resistance and versatility, fiberglass reinforced plastic (FRP) is a popular material for many different industries like chemical and pharmaceutical engineering, semiconductor production, refineries and paper mills, etc. If use the food grade resin, the fiberglass products can also be used for drinking water, food, say sauce, fermentation, wine, etc. The detailed features of fiberglass c...
-
Factory Cheap Hot CPVC FRP Pipe - Fittings ...
Fiberglass fittings are generally made of hand lay-up process, with high resin content. Different shapes can be realized by using molds. Different resins can be selected for different medium and service conditions. Any special fittings on sizes and shapes will be available upon request. Fiberglass fittings are very popular as they are featured by: • Great strength in relation to the weight • Electrical and thermal insulation • Resistant to corrosion and chemicals • Resistant to the influences...
-
Reasonable price Fiberglass Walkway Grating - ...
Jrain panels are molded in one piece and feature a concave non-slip walking surface. The cost effective panels allow for efficient on-site cutting to minimize grating waste and load bearing bars in both directions allow for use without continuous side support. Jrain’s molded fiberglass grating is significantly lighter in weight than metallic gratings and the high resin content provides excellent corrosion resistance and requires very little maintenance. A higher safety factor is achieve...
