2019 wholesale price Molded Grating - Mandrels and Molds – Jrain
2019 wholesale price Molded Grating - Mandrels and Molds – Jrain Detail:
Jrain offers a wide range of mandrels and molds.
Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds.
Other molds for fittings are mainly used for hand lay-up process.
Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durability.
Smooth surface together with a certain of taper and the demolding agent make the demolding process easy, and save a lot of labor and time, and increase the product quality.
Steel pipe mandrel can realize:
Wall thickness: >=7mm
Taper: +/-1.0mm
Steel + FRP pipe mandrel can be used for longer time, as the steel structure give strong support and the FRP surface can be repaired for small defects.
Our mandrels and molds are conformed to national standards. They are with high accuracy and not easy to deform, and as a result, can serve for longer time.
The pipe mandrel can be used for producing the following connection type: plain ends, adhesive bonded, rubber seal lock joint and rubber seal joint, bell and spigot joint, etc.
Except the normal molds, Jrain provides contractile molds also.
Other special molds are available upon request.
Jrain’s mandrels and molds supplied shall be of the best quality, completely new and reliable and the type selection complies with requirement of process technology as well as normal and safe operation and their long term service.
Product detail pictures:
Related Product Guide:
High quality Initial,and Buyer Supreme is our guideline to offer the ideal assistance to our shoppers.At present, we are striving our best to become amongst the ideal exporters inside our industry to satisfy shoppers more want for 2019 wholesale price Molded Grating - Mandrels and Molds – Jrain , The product will supply to all over the world, such as: Oman, Buenos Aires, Finland, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
By Constance from Malta - 2018.10.09 19:07
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By Ricardo from Pretoria - 2017.12.02 14:11
Related products
-
China Cheap price GRP Winding Machine - Mandre...
Jrain offers a wide range of mandrels and molds. Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds. Other molds for fittings are mainly used for hand lay-up process. Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durabili...
-
Reasonable price Fiberglass Walkway Grating - ...
Jrain panels are molded in one piece and feature a concave non-slip walking surface. The cost effective panels allow for efficient on-site cutting to minimize grating waste and load bearing bars in both directions allow for use without continuous side support. Jrain’s molded fiberglass grating is significantly lighter in weight than metallic gratings and the high resin content provides excellent corrosion resistance and requires very little maintenance. A higher safety factor is achieve...
-
Factory Cheap Hot CPVC FRP Pipe - Fittings ...
Fiberglass fittings are generally made of hand lay-up process, with high resin content. Different shapes can be realized by using molds. Different resins can be selected for different medium and service conditions. Any special fittings on sizes and shapes will be available upon request. Fiberglass fittings are very popular as they are featured by: • Great strength in relation to the weight • Electrical and thermal insulation • Resistant to corrosion and chemicals • Resistant to the influences...
-
China wholesale FRP Step - Gratings & Cove...
Jrain panels are molded in one piece and feature a concave non-slip walking surface. The cost effective panels allow for efficient on-site cutting to minimize grating waste and load bearing bars in both directions allow for use without continuous side support. Jrain’s molded fiberglass grating is significantly lighter in weight than metallic gratings and the high resin content provides excellent corrosion resistance and requires very little maintenance. A higher safety factor is achieve...
-
Super Lowest Price Fiber Water Tank - Large Si...
The typical process for large size field tanks is: 1. Mobilize the manufacturing team and appoint Project Manager; Ship the machines and materials to project field. 2. Assembly the winding machine and mold at project field according to diameter of tank to be made. 3. Make liner and do winding work according to designed data. 4. Demoulding and then placing the tank to the right place. 5. Install the fittings such as nozzles, ladders, handrails, etc., and do hydrostatic test. Finally hand over...
-
OEM/ODM Manufacturer Underground Fiberglass Tan...
Jrain has our own sophisticated production techniques enabling tanks to be transported at once. Such tanks are manufactured in different sections which can be assembled on site. The compressed shells will be unfolded through special way and bonded together at job site. Except the common advantages of fiberglass tanks, the oblate tanks are also featured by: Solved road transportation problem; Fabricated the components as most as possible at workshop; Minimized the field work; Cost effective; ...
