China Cheap price GRP Winding Machine - Mandrels and Molds – Jrain
China Cheap price GRP Winding Machine - Mandrels and Molds – Jrain Detail:
Jrain offers a wide range of mandrels and molds.
Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds.
Other molds for fittings are mainly used for hand lay-up process.
Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durability.
Smooth surface together with a certain of taper and the demolding agent make the demolding process easy, and save a lot of labor and time, and increase the product quality.
Steel pipe mandrel can realize:
Wall thickness: >=7mm
Taper: +/-1.0mm
Steel + FRP pipe mandrel can be used for longer time, as the steel structure give strong support and the FRP surface can be repaired for small defects.
Our mandrels and molds are conformed to national standards. They are with high accuracy and not easy to deform, and as a result, can serve for longer time.
The pipe mandrel can be used for producing the following connection type: plain ends, adhesive bonded, rubber seal lock joint and rubber seal joint, bell and spigot joint, etc.
Except the normal molds, Jrain provides contractile molds also.
Other special molds are available upon request.
Jrain’s mandrels and molds supplied shall be of the best quality, completely new and reliable and the type selection complies with requirement of process technology as well as normal and safe operation and their long term service.
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as theory of "quality the basic, have faith in the initial and administration the advanced" for China Cheap price GRP Winding Machine - Mandrels and Molds – Jrain , The product will supply to all over the world, such as: Bolivia, Puerto Rico, Norway, Our company insists on the purpose of "takes service priority for standard, quality guarantee for the brand, do business in good faith, to offer skilled, rapid, accurate and timely service for you". We welcome old and new customers to negotiate with us. We are going to serve you with all sincerity!
By Abigail from Haiti - 2018.06.30 17:29
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Elaine from Israel - 2017.08.15 12:36
Related products
-
Good Quality FRP Dual Lamination Product - Dua...
Dual laminate FRP (fiberglass reinforced plastic) combines the outstanding strength of FRP with the high chemical resistance of a thermoplastics inner shell. Combining the strength of FRP and the chemical compatibility of plastics provides customers with a superior alternative to costly metal alloys and rubber-lined steel. Choice of thermoplastic inner shell materials allows a wide range of chemical resistance and operating conditions to be accommodated. The liner is thermoformed and welded a...
-
Professional China FRP Transport Tank - Transp...
Fiberglass transport tanks are featured by: ● Microbiological corrosion resistance; ● Smooth surface and easy to be cleaned; ● High strength and high-pressure resistance; ● Aging resistance; ● Light weight; ● Low thermal conductivity; ● Effective constant temperature storage; ● Long service life, almost more than 35 years; ● Maintenance free; ● Heating or cooling devices can be added as per demanding. Quality requirements with regard to the component of transportation tank are very high as ha...
-
OEM Factory for Tank Fiberglass - Insulation T...
Should insulation be required, it is a simple task to equip the tanks with a 50mm PU foam layer covered by a 5mm FRP layer. This method of insulation produces a K value of 0.5W/m2K. If needed the thickness can be adjusted, for example to 100mm PU foam (0.3W/m2K). But the thickness of insulation is generally to be 30-50mm, while the thickness of outer protection cover can be 3-5mm. FRP tank is strength higher than that of steel, casting iron, plastic and so on. Therefore, by combining the insu...
-
Super Lowest Price Fiber Water Tank - Rectangu...
Fiberglass rectangular tanks can be designed and manufactured on different shapes, sizes, colors, thicknesses, intended service conditions, insulations, conductivities, etc. Many different industries use fiberglass rectangular tanks for their systems: 1. Mixing tank, settler, launder and so on for nuclear energy and smelt and mining industry. Jrain makede the rectangular settlers for many projects. For different projects, different resins are selected to meet different service conditions. Dif...
-
Bottom price Acid Storage Tank - Large Size Fi...
The typical process for large size field tanks is: 1. Mobilize the manufacturing team and appoint Project Manager; Ship the machines and materials to project field. 2. Assembly the winding machine and mold at project field according to diameter of tank to be made. 3. Make liner and do winding work according to designed data. 4. Demoulding and then placing the tank to the right place. 5. Install the fittings such as nozzles, ladders, handrails, etc., and do hydrostatic test. Finally hand over...
-
Excellent quality Pp Frp Tank - Rectangular Ta...
Fiberglass rectangular tanks can be designed and manufactured on different shapes, sizes, colors, thicknesses, intended service conditions, insulations, conductivities, etc. Many different industries use fiberglass rectangular tanks for their systems: 1. Mixing tank, settler, launder and so on for nuclear energy and smelt and mining industry. Jrain makede the rectangular settlers for many projects. For different projects, different resins are selected to meet different service conditions. Dif...
