China wholesale Mandrel - Mandrels and Molds – Jrain
China wholesale Mandrel - Mandrels and Molds – Jrain Detail:
Jrain offers a wide range of mandrels and molds.
Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds.
Other molds for fittings are mainly used for hand lay-up process.
Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durability.
Smooth surface together with a certain of taper and the demolding agent make the demolding process easy, and save a lot of labor and time, and increase the product quality.
Steel pipe mandrel can realize:
Wall thickness: >=7mm
Taper: +/-1.0mm
Steel + FRP pipe mandrel can be used for longer time, as the steel structure give strong support and the FRP surface can be repaired for small defects.
Our mandrels and molds are conformed to national standards. They are with high accuracy and not easy to deform, and as a result, can serve for longer time.
The pipe mandrel can be used for producing the following connection type: plain ends, adhesive bonded, rubber seal lock joint and rubber seal joint, bell and spigot joint, etc.
Except the normal molds, Jrain provides contractile molds also.
Other special molds are available upon request.
Jrain’s mandrels and molds supplied shall be of the best quality, completely new and reliable and the type selection complies with requirement of process technology as well as normal and safe operation and their long term service.
Product detail pictures:
Related Product Guide:
Our company since its inception, constantly regards product or service high quality as business life, continually improve creation technology, make improvements to product high-quality and consistently strengthen business total high-quality management, in strict accordance together with the national standard ISO 9001:2000 for China wholesale Mandrel - Mandrels and Molds – Jrain , The product will supply to all over the world, such as: Uruguay, Costa rica, Cape Town, At Present, our products have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.
By ROGER Rivkin from UAE - 2018.05.15 10:52
The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
By Julia from Morocco - 2018.09.29 17:23
Related products
-
Factory source GRP Food Grade Equipment - Fans...
Fiberglass dampers are used to regulate air flow or shut off and isolate a system. Generally vinyl ester resins are used. When necessary, fire retardant resins are also available for class 1 flame spread. Fiberglass dampers are customized products, be made by hand lay-up process upon mold in most cases. Available in various sizes and shapes With or without actuators The shaft is made of stainless steel or carbon steel in general. Fiberglass demister will connect to a damper / seal valve wit...
-
New Arrival China Frp Sump Cover - Ladders &am...
Fiberglass ladders and handrails have many advantages like below: 1. High strength and impact resisting: compared with steel, the strength of fiberglass is almost same. But fiberglass ladders and handrails can recover after impact because of the good elasticity. 2. Corrosion resistance: Based on actual situations and service conditions, orthophthalic resin, isophthalic resin and vinylester resin can be selected, and so they can be used for long time under the strong acid and alkali environmen...
-
Professional China Fiberglass Dual Lamination &...
Dual laminate FRP (fiberglass reinforced plastic) combines the outstanding strength of FRP with the high chemical resistance of a thermoplastics inner shell. Combining the strength of FRP and the chemical compatibility of plastics provides customers with a superior alternative to costly metal alloys and rubber-lined steel. Choice of thermoplastic inner shell materials allows a wide range of chemical resistance and operating conditions to be accommodated. The liner is thermoformed and welded a...
-
Hot New Products Fiberglass Field Tank - Tanks...
Typical tanks & vessels, including the supplemental components, can be fabricated in virtually any shape or configuration, demonstrating the flexibility inherent with FRP composites. Using our proprietary technology, we have the ability to manufacture the tanks and vessels according to customer’s different requirements in our plant then transport them safely to your site. For larger size tanks, we have the unique ability to build on-site to your exact specifications, and the maximum diame...
-
Good quality FRP Trough Cover - Ladders & ...
Fiberglass ladders and handrails have many advantages like below: 1. High strength and impact resisting: compared with steel, the strength of fiberglass is almost same. But fiberglass ladders and handrails can recover after impact because of the good elasticity. 2. Corrosion resistance: Based on actual situations and service conditions, orthophthalic resin, isophthalic resin and vinylester resin can be selected, and so they can be used for long time under the strong acid and alkali environmen...
-
China wholesale GRP Scrubber - Scrubbers ̵...
Fiberglass scrubbers are very popular for liquid storage, water treatment, FGD system, chemical processing and pollution control, the gas cleaning process, controlling gaseous emissions, especially polluted gases, waste incineration and power generation processes. Because: In comparison to metal or rubber-lined steel products, Fiberglass reinforced plastic (FRP) have many advantages. FRP is very light-weight, very strong and can be produced in a wide range of diameters, which has a direct imp...
