China wholesale Mandrel - Mandrels and Molds – Jrain
China wholesale Mandrel - Mandrels and Molds – Jrain Detail:
Jrain offers a wide range of mandrels and molds.
Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds.
Other molds for fittings are mainly used for hand lay-up process.
Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durability.
Smooth surface together with a certain of taper and the demolding agent make the demolding process easy, and save a lot of labor and time, and increase the product quality.
Steel pipe mandrel can realize:
Wall thickness: >=7mm
Taper: +/-1.0mm
Steel + FRP pipe mandrel can be used for longer time, as the steel structure give strong support and the FRP surface can be repaired for small defects.
Our mandrels and molds are conformed to national standards. They are with high accuracy and not easy to deform, and as a result, can serve for longer time.
The pipe mandrel can be used for producing the following connection type: plain ends, adhesive bonded, rubber seal lock joint and rubber seal joint, bell and spigot joint, etc.
Except the normal molds, Jrain provides contractile molds also.
Other special molds are available upon request.
Jrain’s mandrels and molds supplied shall be of the best quality, completely new and reliable and the type selection complies with requirement of process technology as well as normal and safe operation and their long term service.
Product detail pictures:
Related Product Guide:
The corporation upholds the philosophy of "Be No.1 in high quality, be rooted on credit rating and trustworthiness for growth", will continue to serve outdated and new consumers from home and overseas whole-heatedly for China wholesale Mandrel - Mandrels and Molds – Jrain , The product will supply to all over the world, such as: Cannes, Casablanca, Naples, we've got all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Annie from azerbaijan - 2017.08.18 18:38
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Rigoberto Boler from Frankfurt - 2017.05.02 11:33
Related products
-
Cheapest Price FRP Tee - Fans & Dampers &a...
Fiberglass dampers are used to regulate air flow or shut off and isolate a system. Generally vinyl ester resins are used. When necessary, fire retardant resins are also available for class 1 flame spread. Fiberglass dampers are customized products, be made by hand lay-up process upon mold in most cases. Available in various sizes and shapes With or without actuators The shaft is made of stainless steel or carbon steel in general. Fiberglass demister will connect to a damper / seal valve wit...
-
OEM manufacturer GRP Chemical Product - Fans &...
Fiberglass dampers are used to regulate air flow or shut off and isolate a system. Generally vinyl ester resins are used. When necessary, fire retardant resins are also available for class 1 flame spread. Fiberglass dampers are customized products, be made by hand lay-up process upon mold in most cases. Available in various sizes and shapes With or without actuators The shaft is made of stainless steel or carbon steel in general. Fiberglass demister will connect to a damper / seal valve wit...
-
Cheap PriceList for GRP Stair Tread - Clarifie...
Fiberglass clarifier and settler are lighter than traditional steel material, and helps you find the most suitable joint and assembling details besides products. Jrain offers fiberglass rectangular tanks and clarifiers, settlers, water trough, hood or cover, collection and effluent (launder) for water, wastewater, mining and other industrial applications. The concave faces of the sections transport the sediment toward a sludge pit. During return movement, the wedge-shaped parts of the section...
-
OEM/ODM China GRP Insulation Tank - Tanks and ...
Typical tanks & vessels, including the supplemental components, can be fabricated in virtually any shape or configuration, demonstrating the flexibility inherent with FRP composites. Using our proprietary technology, we have the ability to manufacture the tanks and vessels according to customer’s different requirements in our plant then transport them safely to your site. For larger size tanks, we have the unique ability to build on-site to your exact specifications, and the maximum diame...
-
OEM Factory for Tank Fiberglass - Large Size F...
The typical process for large size field tanks is: 1. Mobilize the manufacturing team and appoint Project Manager; Ship the machines and materials to project field. 2. Assembly the winding machine and mold at project field according to diameter of tank to be made. 3. Make liner and do winding work according to designed data. 4. Demoulding and then placing the tank to the right place. 5. Install the fittings such as nozzles, ladders, handrails, etc., and do hydrostatic test. Finally hand over...
-
China Cheap price GRP Winding Machine - Mandre...
Jrain offers a wide range of mandrels and molds. Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds. Other molds for fittings are mainly used for hand lay-up process. Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durabili...
