Good Quality FRP Tank - Large Size Field Tanks – Jrain
Good Quality FRP Tank - Large Size Field Tanks – Jrain Detail:
The typical process for large size field tanks is:
1. Mobilize the manufacturing team and appoint Project Manager; Ship the machines and materials to project field.
2. Assembly the winding machine and mold at project field according to diameter of tank to be made.
3. Make liner and do winding work according to designed data.
4. Demoulding and then placing the tank to the right place.
5. Install the fittings such as nozzles, ladders, handrails, etc., and do hydrostatic test. Finally hand over to customer.
Jrain is equipped with highly customized winding machines and molds for field manufacturing of fiberglass tanks and vessels. The mechanical properties of the laminates obtained with the field winding equipment are identical to the properties of the laminates produced in workshop. Project schedule must include time to set-up mobile winding machines.
Different resins and fiberglass will be selected when designing the products for the storage and processing of corrosive or abrasive liquids and gases. Different agents and fillers can be used to meet different intended service conditions when required.
Field fabrication and installation can be highly cost-effective, and often overcome size and difficult access problems. On-site manufacturing can minimize transportation costs and can be effectively coordinated with other on-site contractors.
Jrain is rich experienced with manufacturing of large size FRP tanks and vessels at both Chinese and oversea project sites under different environments.
When hand over the machines to customer, Jrain can provide training about the machine usage if required.
Main standards we can follow:
• ASME RTP-1 • ASTM D3299 • ASTM D4097 • BS EN 13121
Product detail pictures:
Related Product Guide:
Our corporation insists all along the quality policy of "product top quality is base of organization survival; purchaser pleasure will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff" plus the consistent purpose of "reputation very first, purchaser first" for Good Quality FRP Tank - Large Size Field Tanks – Jrain , The product will supply to all over the world, such as: venezuela, Nicaragua, Botswana, With the goal of "zero defect". To care for the environment, and social returns, care employee social responsibility as own duty. We welcome friends from all over the world to visit and guide us so that we can achieve the win-win goal together.
By Sabina from Atlanta - 2017.03.07 13:42
High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
By Hulda from Liberia - 2018.11.06 10:04
Related products
-
factory Outlets for Fiberglass Stack Liner - F...
Fiberglass dampers are used to regulate air flow or shut off and isolate a system. Generally vinyl ester resins are used. When necessary, fire retardant resins are also available for class 1 flame spread. Fiberglass dampers are customized products, be made by hand lay-up process upon mold in most cases. Available in various sizes and shapes With or without actuators The shaft is made of stainless steel or carbon steel in general. Fiberglass demister will connect to a damper / seal valve wit...
-
Factory Cheap Hot GRP Step - Ladders & Han...
Fiberglass ladders and handrails have many advantages like below: 1. High strength and impact resisting: compared with steel, the strength of fiberglass is almost same. But fiberglass ladders and handrails can recover after impact because of the good elasticity. 2. Corrosion resistance: Based on actual situations and service conditions, orthophthalic resin, isophthalic resin and vinylester resin can be selected, and so they can be used for long time under the strong acid and alkali environmen...
-
Best quality Plastic Grating For Walkways - Gr...
Jrain panels are molded in one piece and feature a concave non-slip walking surface. The cost effective panels allow for efficient on-site cutting to minimize grating waste and load bearing bars in both directions allow for use without continuous side support. Jrain’s molded fiberglass grating is significantly lighter in weight than metallic gratings and the high resin content provides excellent corrosion resistance and requires very little maintenance. A higher safety factor is achieve...
-
Chinese Professional PVC FRP Pipe - Duct Syste...
Jrain can design the custom, pre-fabricated fiberglass ducts by modern software such as FEA (Finite Element Analysis), Auto CAD, etc. Then Jrain can fabricate the ducts for different features according to specific designs: 1． Abrasion resistant duct for FGD power market applications; 2． Hand lay-up or helically wound; 3． Multiple resin to handle a variety of corrosive environments 4． Fire retardant resin to achieve class 1 flame spread 5． Design engineering, calculations, CAD design, FEA...
-
2019 High quality FRP Clarifier - Clarifiers &...
Fiberglass clarifier and settler are lighter than traditional steel material, and helps you find the most suitable joint and assembling details besides products. Jrain offers fiberglass rectangular tanks and clarifiers, settlers, water trough, hood or cover, collection and effluent (launder) for water, wastewater, mining and other industrial applications. The concave faces of the sections transport the sediment toward a sludge pit. During return movement, the wedge-shaped parts of the section...
-
High Quality FRP Shell - Covers – Jrain
Fiberglass covers are widely used in water and sewage treatment, chemical and petroleum, food, pharmacy, etc. Fiberglass covers are different in colors and shapes such as round, rectangular, arch, flat, house type, etc. as per customer’s requirements. Fiberglass covers are always designed to meet a wide range of temperature, the outer surface finish is remarkable resistant to harsh environmental conditions, making fiberglass an ideal material for exposure to the elements, including the sun, s...
