Good Quality FRP Winding Machine - Mandrels and Molds – Jrain
Good Quality FRP Winding Machine - Mandrels and Molds – Jrain Detail:
Jrain offers a wide range of mandrels and molds.
Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds.
Other molds for fittings are mainly used for hand lay-up process.
Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durability.
Smooth surface together with a certain of taper and the demolding agent make the demolding process easy, and save a lot of labor and time, and increase the product quality.
Steel pipe mandrel can realize:
Wall thickness: >=7mm
Taper: +/-1.0mm
Steel + FRP pipe mandrel can be used for longer time, as the steel structure give strong support and the FRP surface can be repaired for small defects.
Our mandrels and molds are conformed to national standards. They are with high accuracy and not easy to deform, and as a result, can serve for longer time.
The pipe mandrel can be used for producing the following connection type: plain ends, adhesive bonded, rubber seal lock joint and rubber seal joint, bell and spigot joint, etc.
Except the normal molds, Jrain provides contractile molds also.
Other special molds are available upon request.
Jrain’s mandrels and molds supplied shall be of the best quality, completely new and reliable and the type selection complies with requirement of process technology as well as normal and safe operation and their long term service.
Product detail pictures:
Related Product Guide:
carry on to further improve, to guarantee merchandise high-quality in line with market and buyer standard necessities. Our organization has a top quality assurance procedure have already been established for Good Quality FRP Winding Machine - Mandrels and Molds – Jrain , The product will supply to all over the world, such as: Czech republic, Saudi Arabia, Lithuania, Our tenet is "integrity first, quality best". We have confidence in providing you with excellent service and ideal products. We sincerely hope we can establish win-win business cooperation with you in the future!
By Paula from South Korea - 2018.11.04 10:32
Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
By Karl from USA - 2018.02.12 14:52
Related products
-
China Supplier Fiberglass 90 Degree Elbow - Fa...
Fiberglass dampers are used to regulate air flow or shut off and isolate a system. Generally vinyl ester resins are used. When necessary, fire retardant resins are also available for class 1 flame spread. Fiberglass dampers are customized products, be made by hand lay-up process upon mold in most cases. Available in various sizes and shapes With or without actuators The shaft is made of stainless steel or carbon steel in general. Fiberglass demister will connect to a damper / seal valve wit...
-
OEM/ODM Supplier Fiberglass Storage Tanks - Ob...
Jrain has our own sophisticated production techniques enabling tanks to be transported at once. Such tanks are manufactured in different sections which can be assembled on site. The compressed shells will be unfolded through special way and bonded together at job site. Except the common advantages of fiberglass tanks, the oblate tanks are also featured by: Solved road transportation problem; Fabricated the components as most as possible at workshop; Minimized the field work; Cost effective; ...
-
Factory Cheap Hot GRP Step - Gratings & Co...
Jrain panels are molded in one piece and feature a concave non-slip walking surface. The cost effective panels allow for efficient on-site cutting to minimize grating waste and load bearing bars in both directions allow for use without continuous side support. Jrain’s molded fiberglass grating is significantly lighter in weight than metallic gratings and the high resin content provides excellent corrosion resistance and requires very little maintenance. A higher safety factor is achieve...
-
China Factory for Fiberglass absorber - Covers...
Fiberglass covers are widely used in water and sewage treatment, chemical and petroleum, food, pharmacy, etc. Fiberglass covers are different in colors and shapes such as round, rectangular, arch, flat, house type, etc. as per customer’s requirements. Fiberglass covers are always designed to meet a wide range of temperature, the outer surface finish is remarkable resistant to harsh environmental conditions, making fiberglass an ideal material for exposure to the elements, including the sun, s...
-
Super Purchasing for Fiberglass Clarifier Syste...
Fiberglass clarifier and settler are lighter than traditional steel material, and helps you find the most suitable joint and assembling details besides products. Jrain offers fiberglass rectangular tanks and clarifiers, settlers, water trough, hood or cover, collection and effluent (launder) for water, wastewater, mining and other industrial applications. The concave faces of the sections transport the sediment toward a sludge pit. During return movement, the wedge-shaped parts of the section...
-
High Quality Fiberglass Dual Lamination Product...
Dual laminate FRP (fiberglass reinforced plastic) combines the outstanding strength of FRP with the high chemical resistance of a thermoplastics inner shell. Combining the strength of FRP and the chemical compatibility of plastics provides customers with a superior alternative to costly metal alloys and rubber-lined steel. Choice of thermoplastic inner shell materials allows a wide range of chemical resistance and operating conditions to be accommodated. The liner is thermoformed and welded a...
