Good Quality FRP Winding Machine - Mandrels and Molds – Jrain
Good Quality FRP Winding Machine - Mandrels and Molds – Jrain Detail:
Jrain offers a wide range of mandrels and molds.
Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds.
Other molds for fittings are mainly used for hand lay-up process.
Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durability.
Smooth surface together with a certain of taper and the demolding agent make the demolding process easy, and save a lot of labor and time, and increase the product quality.
Steel pipe mandrel can realize:
Wall thickness: >=7mm
Taper: +/-1.0mm
Steel + FRP pipe mandrel can be used for longer time, as the steel structure give strong support and the FRP surface can be repaired for small defects.
Our mandrels and molds are conformed to national standards. They are with high accuracy and not easy to deform, and as a result, can serve for longer time.
The pipe mandrel can be used for producing the following connection type: plain ends, adhesive bonded, rubber seal lock joint and rubber seal joint, bell and spigot joint, etc.
Except the normal molds, Jrain provides contractile molds also.
Other special molds are available upon request.
Jrain’s mandrels and molds supplied shall be of the best quality, completely new and reliable and the type selection complies with requirement of process technology as well as normal and safe operation and their long term service.
Product detail pictures:
Related Product Guide:
Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for Good Quality FRP Winding Machine - Mandrels and Molds – Jrain , The product will supply to all over the world, such as: Kenya, St. Petersburg, Chicago, Our tenet is "integrity first, quality best". Now we have confidence in providing you with excellent service and ideal merchandise. We sincerely hope we can establish win-win business cooperation with you in the future!
By Marcy Real from Riyadh - 2017.06.29 18:55
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Matthew Tobias from Paraguay - 2018.12.11 11:26
Related products
-
Wholesale Price Fiberglass Grating Suppliers -...
Fiberglass ladders and handrails have many advantages like below: 1. High strength and impact resisting: compared with steel, the strength of fiberglass is almost same. But fiberglass ladders and handrails can recover after impact because of the good elasticity. 2. Corrosion resistance: Based on actual situations and service conditions, orthophthalic resin, isophthalic resin and vinylester resin can be selected, and so they can be used for long time under the strong acid and alkali environmen...
-
Bottom price Fiberglass Mining Equipment - Car...
Because of many advantages like below, fiberglass car and boat are very hot products recently in many industries such as transportation, building, electronics, toy cars, yacht, fishing and so on. In addition, as the development of environmental protection awareness, almost every country limit the trees cutting, which pushed the fiberglass boats manufacturing as the fiberglass is the ideal material to construct the middle and small boats. The related accessories for fiberglass cars include bum...
-
Hot Selling for Frp Sheet - Fans & Dampers...
Fiberglass dampers are used to regulate air flow or shut off and isolate a system. Generally vinyl ester resins are used. When necessary, fire retardant resins are also available for class 1 flame spread. Fiberglass dampers are customized products, be made by hand lay-up process upon mold in most cases. Available in various sizes and shapes With or without actuators The shaft is made of stainless steel or carbon steel in general. Fiberglass demister will connect to a damper / seal valve wit...
-
High Quality Fiberglass Scrubber - Scrubbers &...
Fiberglass scrubbers are very popular for liquid storage, water treatment, FGD system, chemical processing and pollution control, the gas cleaning process, controlling gaseous emissions, especially polluted gases, waste incineration and power generation processes. Because: In comparison to metal or rubber-lined steel products, Fiberglass reinforced plastic (FRP) have many advantages. FRP is very light-weight, very strong and can be produced in a wide range of diameters, which has a direct imp...
-
China wholesale FRP Field Tank - Tanks and Ves...
Typical tanks & vessels, including the supplemental components, can be fabricated in virtually any shape or configuration, demonstrating the flexibility inherent with FRP composites. Using our proprietary technology, we have the ability to manufacture the tanks and vessels according to customer’s different requirements in our plant then transport them safely to your site. For larger size tanks, we have the unique ability to build on-site to your exact specifications, and the maximum diame...
-
Factory Supply FRP Customized Fittings - Fitti...
Fiberglass fittings are generally made of hand lay-up process, with high resin content. Different shapes can be realized by using molds. Different resins can be selected for different medium and service conditions. Any special fittings on sizes and shapes will be available upon request. Fiberglass fittings are very popular as they are featured by: • Great strength in relation to the weight • Electrical and thermal insulation • Resistant to corrosion and chemicals • Resistant to the influences...
