High Quality Mold - Mandrels and Molds – Jrain
High Quality Mold - Mandrels and Molds – Jrain Detail:
Jrain offers a wide range of mandrels and molds.
Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds.
Other molds for fittings are mainly used for hand lay-up process.
Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durability.
Smooth surface together with a certain of taper and the demolding agent make the demolding process easy, and save a lot of labor and time, and increase the product quality.
Steel pipe mandrel can realize:
Wall thickness: >=7mm
Taper: +/-1.0mm
Steel + FRP pipe mandrel can be used for longer time, as the steel structure give strong support and the FRP surface can be repaired for small defects.
Our mandrels and molds are conformed to national standards. They are with high accuracy and not easy to deform, and as a result, can serve for longer time.
The pipe mandrel can be used for producing the following connection type: plain ends, adhesive bonded, rubber seal lock joint and rubber seal joint, bell and spigot joint, etc.
Except the normal molds, Jrain provides contractile molds also.
Other special molds are available upon request.
Jrain’s mandrels and molds supplied shall be of the best quality, completely new and reliable and the type selection complies with requirement of process technology as well as normal and safe operation and their long term service.
Product detail pictures:
Related Product Guide:
Our merchandise are commonly recognized and reliable by customers and can meet constantly developing economic and social desires for High Quality Mold - Mandrels and Molds – Jrain , The product will supply to all over the world, such as: Bhutan, Poland, Sri Lanka, Now, we are trying to enter new markets where we do not have a presence and developing the markets we have now the already penetrated. On account of superior quality and competitive price , we'll be the market leader, be sure to don??￥t hesitate to contact us by phone or email, if you are interested in any of our solutions.
By Alexia from Croatia - 2018.09.23 17:37
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Honey from Spain - 2018.09.23 18:44
Related products
-
Manufactur standard GRP Products for Steel Smel...
Main process includes hand lay-up process, vacuum infusion process, winding, etc. Because of its corrosion resistance and versatility, fiberglass reinforced plastic (FRP) is a popular material for many different industries like chemical and pharmaceutical engineering, semiconductor production, refineries and paper mills, etc. If use the food grade resin, the fiberglass products can also be used for drinking water, food, say sauce, fermentation, wine, etc. The detailed features of fiberglass c...
-
OEM/ODM China Frp Pipes And Fittings - Piping ...
Fiberglass pipes include pure fiberglass pipes, sand pipes, insulation pipe, dual laminate pipe (with PVC, CPVC, PE, PP, PVDF, etc.) and so on The wall construction of a fiberglass pipe system consists of three layers: 1． Liner: determines the optimal resistance to the medium. 2． Structural layer: provides high mechanical strength and resistance to loads. 3． Top coat: protects the piping system from weather, chemical penetration and UV radiation. They are very popular in many industries be...
-
Factory wholesale Fiberglass Water Tank - Insu...
Should insulation be required, it is a simple task to equip the tanks with a 50mm PU foam layer covered by a 5mm FRP layer. This method of insulation produces a K value of 0.5W/m2K. If needed the thickness can be adjusted, for example to 100mm PU foam (0.3W/m2K). But the thickness of insulation is generally to be 30-50mm, while the thickness of outer protection cover can be 3-5mm. FRP tank is strength higher than that of steel, casting iron, plastic and so on. Therefore, by combining the insu...
-
100% Original Fiberglass Chemical Product - Co...
Fiberglass covers are widely used in water and sewage treatment, chemical and petroleum, food, pharmacy, etc. Fiberglass covers are different in colors and shapes such as round, rectangular, arch, flat, house type, etc. as per customer’s requirements. Fiberglass covers are always designed to meet a wide range of temperature, the outer surface finish is remarkable resistant to harsh environmental conditions, making fiberglass an ideal material for exposure to the elements, including the sun, s...
-
Reasonable price Fiberglass Reinforced Plastic ...
Jrain has our own sophisticated production techniques enabling tanks to be transported at once. Such tanks are manufactured in different sections which can be assembled on site. The compressed shells will be unfolded through special way and bonded together at job site. Except the common advantages of fiberglass tanks, the oblate tanks are also featured by: Solved road transportation problem; Fabricated the components as most as possible at workshop; Minimized the field work; Cost effective; ...
-
Professional China Fiberglass Pipe - Duct Syst...
Jrain can design the custom, pre-fabricated fiberglass ducts by modern software such as FEA (Finite Element Analysis), Auto CAD, etc. Then Jrain can fabricate the ducts for different features according to specific designs: 1． Abrasion resistant duct for FGD power market applications; 2． Hand lay-up or helically wound; 3． Multiple resin to handle a variety of corrosive environments 4． Fire retardant resin to achieve class 1 flame spread 5． Design engineering, calculations, CAD design, FEA...
