High reputation Frp Underground Tank - Large Size Field Tanks – Jrain
High reputation Frp Underground Tank - Large Size Field Tanks – Jrain Detail:
The typical process for large size field tanks is:
1. Mobilize the manufacturing team and appoint Project Manager; Ship the machines and materials to project field.
2. Assembly the winding machine and mold at project field according to diameter of tank to be made.
3. Make liner and do winding work according to designed data.
4. Demoulding and then placing the tank to the right place.
5. Install the fittings such as nozzles, ladders, handrails, etc., and do hydrostatic test. Finally hand over to customer.
Jrain is equipped with highly customized winding machines and molds for field manufacturing of fiberglass tanks and vessels. The mechanical properties of the laminates obtained with the field winding equipment are identical to the properties of the laminates produced in workshop. Project schedule must include time to set-up mobile winding machines.
Different resins and fiberglass will be selected when designing the products for the storage and processing of corrosive or abrasive liquids and gases. Different agents and fillers can be used to meet different intended service conditions when required.
Field fabrication and installation can be highly cost-effective, and often overcome size and difficult access problems. On-site manufacturing can minimize transportation costs and can be effectively coordinated with other on-site contractors.
Jrain is rich experienced with manufacturing of large size FRP tanks and vessels at both Chinese and oversea project sites under different environments.
When hand over the machines to customer, Jrain can provide training about the machine usage if required.
Main standards we can follow:
• ASME RTP-1 • ASTM D3299 • ASTM D4097 • BS EN 13121
Product detail pictures:
Related Product Guide:
"Based on domestic market and expand overseas business" is our development strategy for High reputation Frp Underground Tank - Large Size Field Tanks – Jrain , The product will supply to all over the world, such as: UK, Ukraine, Mauritania, To win customers' confidence, Best Source has set up a strong sales and after-sales team to deliver the best product and service. Best Source abides by the idea of "Grow with customer" and philosophy of "Customer-oriented" to achieve cooperation of mutual trust and benefit. Best Source will always stand ready to cooperate with you. Let's grow together!
By Irma from Sydney - 2018.09.16 11:31
Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
By Marguerite from Seattle - 2018.08.12 12:27
Related products
-
2019 wholesale price Molded Grating - Winding ...
Complete production line of fiberglass (or fiberglass mortar) pipe: Diameter 50mm – 200mm250mm – 2500mm2600mm – 4000mm Length 6m or 12m Pressure Max. 35 bar Standard AWWA C950, ASTM D3754, BS5480 Control Program Digital Servo Control Mode Automatic / Semi Automatic / Manual Winding Angle 15° to 90° Filament feed speed Max. 90m/min Precision of lining up filament 0.2mm Joint Type Bell and spigot, flange, taper, locking key, butt joint Pipe winders mainly include: ...
-
High Quality FRP Grating - Ladders & Handr...
Fiberglass ladders and handrails have many advantages like below: 1. High strength and impact resisting: compared with steel, the strength of fiberglass is almost same. But fiberglass ladders and handrails can recover after impact because of the good elasticity. 2. Corrosion resistance: Based on actual situations and service conditions, orthophthalic resin, isophthalic resin and vinylester resin can be selected, and so they can be used for long time under the strong acid and alkali environmen...
-
Factory wholesale Fiberglass Playground Equipme...
Fiberglass dampers are used to regulate air flow or shut off and isolate a system. Generally vinyl ester resins are used. When necessary, fire retardant resins are also available for class 1 flame spread. Fiberglass dampers are customized products, be made by hand lay-up process upon mold in most cases. Available in various sizes and shapes With or without actuators The shaft is made of stainless steel or carbon steel in general. Fiberglass demister will connect to a damper / seal valve wit...
-
2019 China New Design Reinforced Plastic Pipe -...
Jrain can design the custom, pre-fabricated fiberglass ducts by modern software such as FEA (Finite Element Analysis), Auto CAD, etc. Then Jrain can fabricate the ducts for different features according to specific designs: 1． Abrasion resistant duct for FGD power market applications; 2． Hand lay-up or helically wound; 3． Multiple resin to handle a variety of corrosive environments 4． Fire retardant resin to achieve class 1 flame spread 5． Design engineering, calculations, CAD design, FEA...
-
Excellent quality Pp Frp Tank - Large Size Fie...
The typical process for large size field tanks is: 1. Mobilize the manufacturing team and appoint Project Manager; Ship the machines and materials to project field. 2. Assembly the winding machine and mold at project field according to diameter of tank to be made. 3. Make liner and do winding work according to designed data. 4. Demoulding and then placing the tank to the right place. 5. Install the fittings such as nozzles, ladders, handrails, etc., and do hydrostatic test. Finally hand over...
-
Top Quality Fiberglass Grid - Clarifiers &...
Fiberglass clarifier and settler are lighter than traditional steel material, and helps you find the most suitable joint and assembling details besides products. Jrain offers fiberglass rectangular tanks and clarifiers, settlers, water trough, hood or cover, collection and effluent (launder) for water, wastewater, mining and other industrial applications. The concave faces of the sections transport the sediment toward a sludge pit. During return movement, the wedge-shaped parts of the section...
