Manufacturer for Fiberglass Insulation Tank - Large Size Field Tanks – Jrain
Manufacturer for Fiberglass Insulation Tank - Large Size Field Tanks – Jrain Detail:
The typical process for large size field tanks is:
1. Mobilize the manufacturing team and appoint Project Manager; Ship the machines and materials to project field.
2. Assembly the winding machine and mold at project field according to diameter of tank to be made.
3. Make liner and do winding work according to designed data.
4. Demoulding and then placing the tank to the right place.
5. Install the fittings such as nozzles, ladders, handrails, etc., and do hydrostatic test. Finally hand over to customer.
Jrain is equipped with highly customized winding machines and molds for field manufacturing of fiberglass tanks and vessels. The mechanical properties of the laminates obtained with the field winding equipment are identical to the properties of the laminates produced in workshop. Project schedule must include time to set-up mobile winding machines.
Different resins and fiberglass will be selected when designing the products for the storage and processing of corrosive or abrasive liquids and gases. Different agents and fillers can be used to meet different intended service conditions when required.
Field fabrication and installation can be highly cost-effective, and often overcome size and difficult access problems. On-site manufacturing can minimize transportation costs and can be effectively coordinated with other on-site contractors.
Jrain is rich experienced with manufacturing of large size FRP tanks and vessels at both Chinese and oversea project sites under different environments.
When hand over the machines to customer, Jrain can provide training about the machine usage if required.
Main standards we can follow:
• ASME RTP-1 • ASTM D3299 • ASTM D4097 • BS EN 13121
Product detail pictures:
Related Product Guide:
We constantly believe that one's character decides products' high quality, the details decides products' high-quality ,together with the REALISTIC,EFFICIENT AND INNOVATIVE crew spirit for Manufacturer for Fiberglass Insulation Tank - Large Size Field Tanks – Jrain , The product will supply to all over the world, such as: Madras, Houston, Egypt, With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.
By ron gravatt from Kenya - 2017.11.11 11:41
The goods are very perfect and the company sales manager is warmful, we will come to this company to purchase next time.
By Antonio from Nairobi - 2017.06.16 18:23
Related products
-
Chinese wholesale GRP Cover - Gratings & C...
Jrain panels are molded in one piece and feature a concave non-slip walking surface. The cost effective panels allow for efficient on-site cutting to minimize grating waste and load bearing bars in both directions allow for use without continuous side support. Jrain’s molded fiberglass grating is significantly lighter in weight than metallic gratings and the high resin content provides excellent corrosion resistance and requires very little maintenance. A higher safety factor is achieve...
-
High Quality FRP Insulation Tank - Transport T...
Fiberglass transport tanks are featured by: ● Microbiological corrosion resistance; ● Smooth surface and easy to be cleaned; ● High strength and high-pressure resistance; ● Aging resistance; ● Light weight; ● Low thermal conductivity; ● Effective constant temperature storage; ● Long service life, almost more than 35 years; ● Maintenance free; ● Heating or cooling devices can be added as per demanding. Quality requirements with regard to the component of transportation tank are very high as ha...
-
China Cheap price GRP Winding Machine - Mandre...
Jrain offers a wide range of mandrels and molds. Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds. Other molds for fittings are mainly used for hand lay-up process. Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durabili...
-
High Quality for GRP Duct - Duct System –...
Jrain can design the custom, pre-fabricated fiberglass ducts by modern software such as FEA (Finite Element Analysis), Auto CAD, etc. Then Jrain can fabricate the ducts for different features according to specific designs: 1． Abrasion resistant duct for FGD power market applications; 2． Hand lay-up or helically wound; 3． Multiple resin to handle a variety of corrosive environments 4． Fire retardant resin to achieve class 1 flame spread 5． Design engineering, calculations, CAD design, FEA...
-
OEM manufacturer GRP Chemical Product - Other ...
Main process includes hand lay-up process, vacuum infusion process, winding, etc. Because of its corrosion resistance and versatility, fiberglass reinforced plastic (FRP) is a popular material for many different industries like chemical and pharmaceutical engineering, semiconductor production, refineries and paper mills, etc. If use the food grade resin, the fiberglass products can also be used for drinking water, food, say sauce, fermentation, wine, etc. The detailed features of fiberglass c...
-
New Fashion Design for Frp Flooring - Fans &am...
Fiberglass dampers are used to regulate air flow or shut off and isolate a system. Generally vinyl ester resins are used. When necessary, fire retardant resins are also available for class 1 flame spread. Fiberglass dampers are customized products, be made by hand lay-up process upon mold in most cases. Available in various sizes and shapes With or without actuators The shaft is made of stainless steel or carbon steel in general. Fiberglass demister will connect to a damper / seal valve wit...
