China wholesale Mandrel - Mandrels and Molds – Jrain
China wholesale Mandrel - Mandrels and Molds – Jrain Detail:
Jrain offers a wide range of mandrels and molds.
Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds.
Other molds for fittings are mainly used for hand lay-up process.
Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and molds are with high durability.
Smooth surface together with a certain of taper and the demolding agent make the demolding process easy, and save a lot of labor and time, and increase the product quality.
Steel pipe mandrel can realize:
Wall thickness: >=7mm
Taper: +/-1.0mm
Steel + FRP pipe mandrel can be used for longer time, as the steel structure give strong support and the FRP surface can be repaired for small defects.
Our mandrels and molds are conformed to national standards. They are with high accuracy and not easy to deform, and as a result, can serve for longer time.
The pipe mandrel can be used for producing the following connection type: plain ends, adhesive bonded, rubber seal lock joint and rubber seal joint, bell and spigot joint, etc.
Except the normal molds, Jrain provides contractile molds also.
Other special molds are available upon request.
Jrain’s mandrels and molds supplied shall be of the best quality, completely new and reliable and the type selection complies with requirement of process technology as well as normal and safe operation and their long term service.
Product detail pictures:
Related Product Guide:
Just about every member from our large efficiency income crew values customers' wants and enterprise communication for China wholesale Mandrel - Mandrels and Molds – Jrain , The product will supply to all over the world, such as: Maldives, Kuwait, America, We warmly welcome domestic and overseas customers to visit our company and have business talk. Our company always insists on the principle of "good quality, reasonable price, the first-class service". We are willing to build long-term, friendly and mutually beneficial cooperation with you.
By Rita from Nepal - 2017.12.09 14:01
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Honorio from UAE - 2017.10.23 10:29
Related products
-
Lowest Price for FRP Flange and Blind - Covers...
Fiberglass covers are widely used in water and sewage treatment, chemical and petroleum, food, pharmacy, etc. Fiberglass covers are different in colors and shapes such as round, rectangular, arch, flat, house type, etc. as per customer’s requirements. Fiberglass covers are always designed to meet a wide range of temperature, the outer surface finish is remarkable resistant to harsh environmental conditions, making fiberglass an ideal material for exposure to the elements, including the sun, s...
-
Best quality GRP Chemical Tank - Insulation Ta...
Should insulation be required, it is a simple task to equip the tanks with a 50mm PU foam layer covered by a 5mm FRP layer. This method of insulation produces a K value of 0.5W/m2K. If needed the thickness can be adjusted, for example to 100mm PU foam (0.3W/m2K). But the thickness of insulation is generally to be 30-50mm, while the thickness of outer protection cover can be 3-5mm. FRP tank is strength higher than that of steel, casting iron, plastic and so on. Therefore, by combining the insu...
-
Cheap PriceList for GRP Stair Tread - Car and ...
Because of many advantages like below, fiberglass car and boat are very hot products recently in many industries such as transportation, building, electronics, toy cars, yacht, fishing and so on. In addition, as the development of environmental protection awareness, almost every country limit the trees cutting, which pushed the fiberglass boats manufacturing as the fiberglass is the ideal material to construct the middle and small boats. The related accessories for fiberglass cars include bum...
-
Hot New Products Fiberglass Field Tank - Insul...
Should insulation be required, it is a simple task to equip the tanks with a 50mm PU foam layer covered by a 5mm FRP layer. This method of insulation produces a K value of 0.5W/m2K. If needed the thickness can be adjusted, for example to 100mm PU foam (0.3W/m2K). But the thickness of insulation is generally to be 30-50mm, while the thickness of outer protection cover can be 3-5mm. FRP tank is strength higher than that of steel, casting iron, plastic and so on. Therefore, by combining the insu...
-
Hot sale Pultruded Fiberglass Grating - Steps ...
Fiberglass stair tread is used not only by housing estates but also by many factories because of anti-corrosion performance, such as water treatment, chemical plants, petroleum industry, textile mill, power plant, sea food processing plant, beverage industry, ship steps, paper and pulp factory, etc. Stair Tread Thickness Mesh Panel Size Maximum Span for 300lbs. (136kg) at Mid-Span Panel Weight Open Area 1/8” (3.2mm) or less deflection 1/4” (6.4mm) or less deflection 1-1/2” ...
-
2019 High quality FRP Storage Tank - Large Siz...
The typical process for large size field tanks is: 1. Mobilize the manufacturing team and appoint Project Manager; Ship the machines and materials to project field. 2. Assembly the winding machine and mold at project field according to diameter of tank to be made. 3. Make liner and do winding work according to designed data. 4. Demoulding and then placing the tank to the right place. 5. Install the fittings such as nozzles, ladders, handrails, etc., and do hydrostatic test. Finally hand over...
