Winding Machines for Pipes & Tanks
Complete production line of fiberglass (or fiberglass mortar) pipe:
| Diameter | 50mm - 200mm250mm – 2500mm
2600mm – 4000mm |
| Length | 6m or 12m |
| Pressure | Max. 35 bar |
| Standard | AWWA C950, ASTM D3754, BS5480 |
| Control Program | Digital Servo |
| Control Mode | Automatic / Semi Automatic / Manual |
| Winding Angle | 15° to 90° |
| Filament feed speed | Max. 90m/min |
| Precision of lining up filament | 0.2mm |
| Joint Type | Bell and spigot, flange, taper, locking key, butt joint |
Pipe winders mainly include:
| Material feeding equipment | 1 set | Requisite |
| Liner application equipment | 1 set | Requisite |
| Winding machine | 1 set | Requisite |
| Curing machine | 4 sets | Requisite (quantity is optional) |
| Cutting & grinding machine | 1 set | Requisite |
| Extraction machine | 1 set | Requisite |
| Hydraulic pressure tester | 1 set | Optional |
| Mandrels for pipes | A lot | Quantity and specification are optional |
| Moulds for pipe fittings | A lot | Quantity and specification are optional |
Complete production line of fiberglass tank
| Diameter | 500mm - 4000mm4000mm – 12000mm
12000mm – 20000mm |
| Length | 12m or less |
| Volume | Max. 5000m3 |
| Pressure | Max. 12 bar |
| Standard | ASTM 3299, ASME RTP-1, BS4994 |
| Control Program | Digital Servo |
| Control Mode | Automatic / Semi Automatic / Manual |
| Winding Angle | 15° to 90° |
| Filament feed speed | Max. 90m/min |
| Precision of lining up filament | 1mm |
| Tank Type | Vertical, Horizontal, Cone |
Filament winders are characterized by the high precision of winding line, high productivity, low energy-consumption, easy installation, adjustment and maintenance. They adopt the industrial computer control, so the usage and operation are very convenient.
Jrain is a professional manufacturer in fiberglass field for many years, therefore we know very well not only the machines and products, but also the materials selection, quality inspection, etc. We can provide all detailed information that you needed. Welcome to contact us for professional solutions.
Related products
-
Mandrels and Molds
Jrain offers a wide range of mandrels and molds. Pipe mandrels and cylinder tank molds, together with the winding machine, are mainly used to make the fiberglass pipe and tanks. The molds rotate and then the winding machine will wind the fiberglass onto the molds. Other molds for fittings are mainly used for hand lay-up process. Normally, pipe mandrels are made of pure steel or steel with FRP, and tank molds and fittings molds are made of steel. These mandrels and mo...
